Best Seller

Oak Timber Framing Pegs

SKU: OPEGS200MM Category:
(6 customer reviews)

collect,express

Traditional Timber Framing Oak Pegs

Available to be dispatched in 2-3 days on most orders

Oak pegs suitable for Timber framing, Restoration projects and new builds
From sustainably managed Oak

    Taper from 3/4′ (19mm) to 5/8′ (15mm) and octagonal is shape (sizes are approx)
    Solid Dried Oak pegs
    Available to order in lengths of 8′(200mm), 10′(250mm) or 12′(300mm)

  *Please note price is per peg

Weight 1200 kg
Choose Size:

, ,

As Oak dries out over time, it can develop cracks and splits known as shakes. These tiny cracks run along the grain of the wood, which means that they do not affect its structural integrity. This cracking process happens faster in warmer weather, as the sun and wind speed up the drying process and can even cause shakes to form on recently cut green oak. As such, these should not be seen as faults, as it is a natural process. It is possible to reduce cracking in green oak by adding wood oil for protection. One of the main reasons for posts to rot is the constant wetting and drying of the post. To help extend the life of the post, you can slope the soil or concrete the post is set in so that water doesn't gather at the base of the post. Sealing the post with oil at the level it goes in the ground also helps extend the life as it reduces the moisture absorption into the post.

The pegs should be tapered 3/4' to 5/8' and so ideally the hole drilled needs to be between this at 11/16' The peg is then hammered into the hole so that it sticks out evenly either side of the hole. The peg is air dried and so will not change shape, but the beam is green and so will shrink over time tightening on the peg and creating a very strong joint. While it will be tempting to cut off the peg level with beam, it will look odd after a period of time. The beam will shrink over a period of time, whilst the peg doesn't. As the beams will shrink at slightly different rates, the pegs will then stick out again at different lengths and there will not a consistent look to them.
 
 

Timber Delivery Rates for Mainland UK start from Bench slats - £11.99 Large Timber - £29.99 Double Pallet - £119.99(up to 2.4m) Triple Pallet - £169.00 (up to 3.6m). Green oak is delivered by pallet force deliveries on a two-day service, although this can vary depending on demand. The costs are determined by the length of the timber and pallet spaces. Green oak is heavy and it is your responsibility to lift it off the lorry (the driver is under no obligation to help). Please ensure you have the necessary equipment or manpower to unload the lorry. This may require more than one person. Our office can advise on approximate weights. If there are access issues please advise prior to delivery and we can arrange necessary transport although this may occur a surcharge. We will call before dispatch once the order is ready to organise a delivery day. We book in all deliveries and Pallet force will call on the day of delivery to give a rough delivery time. Local delivery can be organised on our flat bed. Hi ab delivery can organised at an additional cost. Please call 01935 822207 option 3 or email timber@yandles.co.uk All deliveries must be accepted in person or there could be a re-delivery fee. Please accept our apologies, but for the following postcodes, delivery at the price quoted can only be unloaded by mechanical means (forklift etc.). If it needs to be manually unloaded, please email timber@yandles.co.uk and we can look at alternative delivery methods. FY0, FY1, FY2, FY3, FY4, FY5, FY6, FY7, FY8, HR1, HR2, HR3, HR4, HR5, HR6, HR7, HR8, HR9, G1, G11, G12, G13, G14, G15, G2, G20, G21, G22, G23, G3, G31, G32, G33, G34, G4, G40, G41, G42, G43, G44, G45, G46, G5, G51, G52, G53, G58, G60, G61, G62, G63, G64, G65, G66, G67, G68, G69, G70, G71, G72, G73, G74, G75, G76, G77, G78, G79, G80, G81, G82, G83, G84, G9, G90, GU1, GU10, GU2, GU3, GU4, GU5, GU6, GU7, GU8, GU9, KT1, KT10, KT11, KT17, KT18, KT19, KT2, KT20, KT21, KT22, KT23, KT24, KT3, KT4, KT5, KT6, KT7, KT9, ML1, ML2, ML3, ML4, ML5, ML6, ML7, PR0, PR1, PR11, PR2, PR25, PR26, PR3, PR4, PR5, PR6, PR7, PR8, PR9, RH1, RH2, RH3, RH4, RH5, RH6, RH7, RH8, RH9, WA3, WA4, WA5, WA55, WA6, WA7, WA13, WA14, WA15, WA16

We plane fresh sawn oak( green oak) ex inch. This means we plane it as thick as it will go, ensuring a smooth finish. It means it will be under the size of the original beam, but smooth all over. Generally planing takes 4-6 mm off the thickness of a piece. For this we use a hand plane. There are two main reasons. The first being that fresh sawn oak has tanins which react with metal creating a blue stain which is unsightly. The second is that that beams are heavy and difficult to handle through a thicknesser. Fresh sawn oak tends to get stuck through a thicknesser which creates white marks and even burn marks. 

6 reviews for Oak Timber Framing Pegs

  1. StefanMacDonaldBrown (verified owner)

    Really good and well priced.

  2. TimKeates (verified owner)

    Disappointing pegs as machine cut and very dry so fractured easily. Ended up making our own from green oak. Should have done this in the first place as handmade follows the grain!

  3. Simon (verified owner)

    Really pleased with these pegs. The taper makes them much easier to use than oak dowels that I had already brought from another supplier. I’ll be back for more for my next project.

  4. DAVIDJOHNSTON (verified owner)

    Did exactly what they were purchased for.

  5. JeremyMurfitt (verified owner)

    I only needed a small number of pegs for some framing I am doing and this is there second lot I have purchased. Easy process to order and they arrived within 48 hours. Excellent quality.

  6. RuEllingham (verified owner)

    Excellent service as always from the team at Yandles. The Oak pegs are well made, strong and will be using them from now on.

Add a review
Shopping Basket
Scroll to Top