Big Straight Grain Green Oak Brace

Cracking in Green Oak

As Oak dries out over time, it can develop cracks and splits known as shakes. These tiny cracks run along the grain of the wood, which means that they do not affect its structural integrity. This cracking process happens faster in warmer weather, as the sun and wind speed up the drying process and can even cause shakes to form on recently cut green oak. As such, these should not be seen as faults, as it is a natural process. It is possible to reduce cracking in green oak by adding wood oil for protection. One of the main reasons for posts to rot is the constant wetting and drying of the post. To help extend the life of the post, you can slope the soil or concrete the post is set in so that water doesn't gather at the base of the post. Sealing the post with oil at the level it goes in the ground also helps extend the life as it reduces the moisture absorption into the post.

Delivery

Timber Delivery Rates for Mainland UK start from: Bench slats - £11.99 Large Timber - £29.99 Double Pallet - £119.99(up to 2.4m) Triple Pallet - £169.00 (up to 3.6m). Green oak is delivered by palletised deliveries on a two day service and the costs are determined by length Green oak is heavy and will require lifting off the lorry. Please ensure you have necessary equipment or man power to unload the lorry. This may requre more than one person. Our office can adivse on approximate weights    If there are access issues please advise prior to delivery and we can arrange necessary transport although this may occur a sur charge.   We will call before dispatch once the order is ready to orginise a delivery day. We book in all deliveries and Pallet force will call on the day of delivery to give a rough delivery time.     Local delivery can be organised on our flat bed. Please ask for a quote. Hi ab delivery can organised at an additional cost. Please call 01935 822207 option 3 or email timber@yandles.co.uk   All deliveries must be accepted in person or there could be a re delivery fee.   Delivery is available within a 30 mile radius of site. Please phone for a quote on 01935 822207 or email timber@yandles.co.uk

Delivery

Timber Delivery Rates for Mainland UK start from Bench slats - £11.99 Large Timber - £29.99 Double Pallet - £119.99(up to 2.4m) Triple Pallet - £169.00 (up to 3.6m). Green oak is delivered by pallet force deliveries on a two-day service, although this can vary depending on demand. The costs are determined by the length of the timber and pallet spaces. Green oak is heavy and it is your responsibility to lift it off the lorry (the driver is under no obligation to help). Please ensure you have the necessary equipment or manpower to unload the lorry. This may require more than one person. Our office can advise on approximate weights. If there are access issues please advise prior to delivery and we can arrange necessary transport although this may occur a surcharge. We will call before dispatch once the order is ready to organise a delivery day. We book in all deliveries and Pallet force will call on the day of delivery to give a rough delivery time. Local delivery can be organised on our flat bed. Hi ab delivery can organised at an additional cost. Please call 01935 822207 option 3 or email timber@yandles.co.uk All deliveries must be accepted in person or there could be a re-delivery fee. Please accept our apologies, but for the following postcodes, delivery at the price quoted can only be unloaded by mechanical means (forklift etc.). If it needs to be manually unloaded, please email timber@yandles.co.uk and we can look at alternative delivery methods. FY0, FY1, FY2, FY3, FY4, FY5, FY6, FY7, FY8, HR1, HR2, HR3, HR4, HR5, HR6, HR7, HR8, HR9, G1, G11, G12, G13, G14, G15, G2, G20, G21, G22, G23, G3, G31, G32, G33, G34, G4, G40, G41, G42, G43, G44, G45, G46, G5, G51, G52, G53, G58, G60, G61, G62, G63, G64, G65, G66, G67, G68, G69, G70, G71, G72, G73, G74, G75, G76, G77, G78, G79, G80, G81, G82, G83, G84, G9, G90, GU1, GU10, GU2, GU3, GU4, GU5, GU6, GU7, GU8, GU9, KT1, KT10, KT11, KT17, KT18, KT19, KT2, KT20, KT21, KT22, KT23, KT24, KT3, KT4, KT5, KT6, KT7, KT9, ML1, ML2, ML3, ML4, ML5, ML6, ML7, PR0, PR1, PR11, PR2, PR25, PR26, PR3, PR4, PR5, PR6, PR7, PR8, PR9, RH1, RH2, RH3, RH4, RH5, RH6, RH7, RH8, RH9, WA3, WA4, WA5, WA55, WA6, WA7, WA13, WA14, WA15, WA16

Planing

We plane fresh sawn oak( green oak) ex inch. This means we plane it as thick as it will go, ensuring a smooth finish. It means it will be under the size of the original beam, but smooth all over. Generally planing takes 4-6 mm off the thickness of a piece. For this we use a hand plane. There are two main reasons. The first being that fresh sawn oak has tanins which react with metal creating a blue stain which is unsightly. The second is that that beams are heavy and difficult to handle through a thicknesser. Fresh sawn oak tends to get stuck through a thicknesser which creates white marks and even burn marks.