Record Power CamVac CGV286 Dust Extractor + 2m Hose & Easy-Fit Cuff Single / Twin Motor

"This is a seriously awesome bit of kit. It replaced a 1hp chip extractor (which was venting outside) in my workshop. I lost the option of outside venting so more "suck" and better filtration was needed. It gets used on a router table and routing handheld, a 1.5m pad sander, a couple of saws and for clearing up. I use 100mm or 32mm hose depending on the tool. I was not really sure about buying the Camvac, as there appear to be many similar products out there for a lot less. However having played with the cheaper ones, this is 100% worth it - my shop is way cleaner now than with the chip extractor. The single motor is enough for the 32mm hose on the router and saws, bit for the 100mm on the sander and router table the second motor makes all the difference. This is a quality bit of kit, everything about it is solid and feels overbuilt. The main filtration bag is washable with cold water, so it's easy to look after. For bigger shops that produce more waste you might want to consider a larger capacity, although this is plenty for me. It is quite noisy too, so it might be a bit much to have it on all the time, unless you vent it outside. I wear cans all the time anyway and it's fine with them on. Highly recommended!! "