Microjig GRR-RIPPER 3D Pushblock

Click on image to enlarge

Item: GR-100

MPN: GR-100

Don't use a table saw without it

Write the first review

in stock Available for home delivery

Product Description

The GRR-RIPPER® 3D Pushblock is engineered to give you the most accurate cuts possible while protecting your hands at all times. No other pushblock offers this level of precision, control, and safety. Make difficult cuts with ease, and prevent kickback like never before.

Three directions of force provide essential stability for superior precision, safety, and control.

Downward pressure stabilizes work piece on a flat surface.
Inward pressure against the fence virtually eliminates kickback.
Forward pressure feeds stock consistently through the cut to eliminate burning and blade marks.

GREEN GRR-RIP® gives you incredible traction for easy handling of hardwoods, composites, plastics and aluminum. Its treaded surface conforms to the workpiece for superior control.
Dust and buildup easily wipes off with denatured alcohol. The additional 1″ of GREEN GRR-RIP® on the Adjustable Spacer provides even more traction for ADVANCED control.

Fully Adjustable
- Center Leg Adjusts to varying material widths, allowing you to control both the keeper and off-cut sides of your workpiece through the entire cut.
- Balance Support Adjusts to match material thickness, keeping the GRR-RIPPER® upright and square.

Virtually eliminates kickback on table saws.

Kickback occurs when the workpiece strays from the fence, and gets pinched between the saw blade and the fence. The rear teeth of the blade grab the workpiece, turning it into a dangerous projectile. The only way to avoid kickback is to maintain control of your workpiece through the entire cut.

The GRR-RIPPER® provides downward and inward pressure, keeping both sides of the cut parallel to the blade. This prevents the workpiece from straying from the rip fence, virtually eliminating kickback.

Rip without stopping and burning.

Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing.

Over 30+ uses on table saws, router tables, jointers, and band saws.

Important Notice: Use Micro Jig products to improve your safety when machining, they should complement your machine guards not replace them. All relevant health and safety practices should be used which are applicable to your country of residence.

View other products in Microjig: Smarter Woodworking Tools »