High Build Guitar Finishing Oil

Crimson Guitars High Build Guitar Finishing Oil

Write the first review

Available for home delivery

in stock Available

Note: Currently not available for delivery to Far Off Shore, EU-1, EU-2, EU-3 and EU-4.

£11.95 inc VAT

add to wish list

Product Description

This is the perfect product to give your guitar a natural looking finish.

This high build oil can give a matte finish or a gloss finish depending on the number of applications.  It builds up to a fine finish with a minimum of fuss and is water resistant and will not change color or crack with age.

Our 150ml bottle of High Build Guitar Finishing Oil is enough to cover one full guitar to a gloss finish, or two guitars if applied to a matte finish.  For best results apply 3 to 4 coats of finish with 2 to 4 hours of curing time in between.

Apply the initial coat to finely sanded wood, at least, 240 grit, or after a sealer coat of our Penetrating Finishing Oil.  Apply with a brush, soft cloth or rub in with 1200 grit wet and dry paper.  Leave to cure for 5 to 10 minutes, or until sticky.  Rub off the excess with a clean cloth and leave to cure completely before applying the next coat.

I find that the best result is  achieved rubbing the oil in with 1200 grit wet and dry paper and then wiping away all the excess until you have a finish that is dry to the touch.  A few coats like this followed by, if you fancy, some wax.  I like heating up the cloth I apply wax with so it goes easier.  You shouldn’t need to key the surface before applying more coats but if you want to just rub back a little bit with more 1200 grit wet and dry using a little of the oil as a lubricant. – Ben Crowe


Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from £3.99

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this pagebookmark and share