Easy Wood Tools mini 3 piece set

Sold Out
Easy Wood Tools mini 3 piece set



Write the first review

Available to Pre-Order only - Currently out of stock

unavailable Unavailable

£175.99 inc VAT

add to wish list

Product Description


a set of three of these popular tools at a great price!

The Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest and level to the floor, the Easy Rougher will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to 'take the pounding' that you would normally suffer through when using a conventional bowl gouge for roughing. No more ‘white knuckling’ a bowl gouge.

    • Cuts left, right and straight in without changing approach angle


    • Truly deeper cuts – up to 1' off the diameter in one pass with the Full Size Rougher.


    • Requires very little physical strength or exertion


    • Your feet and hips stay in nearly the same position for the blank roughing process.


    • Very minimal handle bouncing on irregular shaped blanks


    • Reduced kick-back or sucking into work piece


    • Available Chip Deflector keeps most projectiles away from the face and neck


    • No intimidating cutting angles to learn and remember


    • No bevels to ride


    • No fear of a dangerous catch

The Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit.


These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects such as small coves and beads on both spindle and bowl work. They are also very handy for cutting chuck tenons and making inside reverse angle cuts for inside chucking bowls with dovetail jaws. You may find they work well for hogging your green wood projects too.


The Easy Detailers are engineered to cut going straight in employing just the nose of the tool.


The Easy Detailer tools are engineered with a reduced relief angle to the long cuttings edges making the long edges less aggressive when held in contact with the wood as the nose of the tool is cutting. In use, the long edge is intended to perform as a 'control surface' and serve to be in contact with the wood just behind the cut; much like a bevel is being rubbed.


For safety reasons, avoid plunging the tool so deep into the work at once to the depth you would have both sides of the cutter in contact with the wood too greatly at the same time. This could cause too much force at once and lead to binding of the tool in the groove.


Each diamond-shaped Easy Detailer cutter is engineered to fit all size Detailer tools in our current product line. When the cutter eventually dulls, just loosen the retaining screw and rotate cutter, then re-tighten the screw.


Replacement Genuine EWT Carbide Cutter number is engraved right on the top of all stainless steel tool bars.

Home Delivery

UK mainland delivery from £6.99

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this page