Charnwood Microclene MC760 Air Filter

Charnwood Charnwood Microclene MC760 Air Filter

Item: MC760

MPN: TF810

Write the first review

Online Exclusive - Not Available For In-store Collection

available Available

£289.99 inc VAT

add to wish list

Product Description

Micro clean air filters are designed to remove airborne dust particles from the air in the workshop. They are compact, lightweight and very quiet in operation. They are capable of running for long periods of time while you work, and for best results, left running for a period after the dust producing activity has finished.When in operation they quietly clean and filter the air, trapping dust particles in the filter medium. Most woodworkers will have had experience of leaving the workshop nice and tidy, but then the next day discovering a layer of dust has settled on all horizontal surfaces overnight. The micro clean is designed to prevent completely or drastically minimise that phenomenon.An air cleaner should be used in conjunction with a dust extractor for maximum dust control.It is recommended that the air in the workshop is filtered by the micro clean 10 times per hour (minimum recommended level is 6 times per hour). Measure the three dimensions to calculate the cubic volume of your workshop, then check which size of air filter is most suitable.Manufactured in the UK using high quality components throughout. The filter is made of EU4 grade, non-woven, thermally bonded polyester fibres, which means it will filter out 95% of all dust at 2 microns or larger, 80% of dust down to 1 micron and 65% of dust down to 0.4 micron. The filters are low cost and very easy to replace. As a general rule-of thumb filters should be regularly checked and replaced every 6-12 months. The highly reliable motors are Swiss made to a very exacting standard. Thermally protected and most important to woodworkers they are spark proof, so less chance of dust combustion. Ingress protected to IP44 standard.MC760 has an airflow rate of 780 cubic metres per hour. Therefore it is suitable for a workshop with a volume of up to 78 cubic metres, roughly equal to a double garage. For example: Floor area 7m (23’) x 5m (16’) x height 2.2m (9’).Designed to sit on a shelf, sit on a bench or be wall mounted. Locate either: close to the centre of the room to create the best airflow, or locate closer to the source of the dust to filter it out of the air as quick as possible.


MC760 SpecificationMotor 100w, 240vFlowrate 780m3/hourMax. Workshop Size 78m2Filtration Efficiency 95% @ 2 micron 80% @ 1 micron 65% @ 0.4 micronDust Holding Capacity 500g/m2Noise Level 63dbDimensions (WxDxH) 300 x 300 x 120mm Weight 5.9kgRating HobbyWarranty 1 YearEAN Barcode Number 5060486046294

Home Delivery

UK mainland delivery from £6.49

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this pagebookmark and share

People who bought this also bought...

55MM Abranet sanding Disc
55MM Abranet sanding Disc
from £15.99 inc VAT