Charnwood Microclene MC200 Air Filter

New
Charnwood Charnwood Microclene MC200 Air Filter

Item: MC200

MPN: TF 250

Microclene MC200 Air Filter

Online Exclusive - Not Available For In-store Collection

available Available

£204.99 inc VAT
You may also need:

add to wish list
updown

Product Description

Micro clean air filters are designed to remove airborne dust particles from the air in the workshop. They are compact, lightweight and very quiet in operation. They are capable of running for long periods of time while you work, and for best results, left running for a period after the dust producing activity has finished.When in operation they quietly clean and filter the air, trapping dust particles in the filter medium. Most woodworkers will have had experience of leaving the workshop nice and tidy, but then the next day discovering a layer of dust has settled on all horizontal surfaces overnight. The micro clean is designed to prevent completely or drastically minimise that phenomenon.An air cleaner should be used in conjunction with a dust extractor for maximum dust control.It is recommended that the air in the workshop is filtered by the micro clean 10 times per hour (minimum recommended level is 6 times per hour). Measure the three dimensions to calculate the cubic volume of your workshop, then check which size of air filter is most suitable.Manufactured in the UK using high quality components throughout. The filter is made of EU4 grade, non-woven, thermally bonded polyester fibres, which means it will filter out 95% of all dust at 2 microns or larger, 80% of dust down to 1 micron and 65% of dust down to 0.4 micron. The filters are low cost and very easy to replace. As a general rule-of thumb filters should be regularly checked and replaced every 6-12 months. The highly reliable motors are Swiss made to a very exacting standard. Thermally protected and most important to woodworkers they are spark proof, so less chance of dust combustion. Ingress protected to IP44 standard.MC200 has an airflow rate of 200 cubic metres per hour. Therefore it is suitable for a small workshop with a volume of up to 20 cubic metres. For example: Floor area 3m (10’) x 3m (10’) x height 2.2m (9’).Designed to sit on a shelf or bench. Locate either: close to the centre of the room to create the best airflow, or locate closer to the source of the dust to filter it out of the air as quick as possible. Supplied with 1m power cable and plug.

Customer Reviews

By on
"When I eventually received my air filter it arrived with no paperwork, no label, no specification, no instructions, no serial number, no safety guide, no guarantee, absolutely no form of identification whatsoever. In fact it was just a ready to plug in air filter, and it works OK. I am not dissatisfied, just a little surprised!"
Star Rating 4
Staff response...
"Thank you for your feedback, we have noticed the lack of "no paperwork, no label, no specification, no instructions, no serial number, no safety guide, no guarantee, absolutely no form of identification whatsoever" ourselves & have passed these comments back to the supplier & suggest a review of their packaging. Hopefully in the new year they will be including further literature. "

Spec

SpecificationMotor 53w, 240vFlowrate 200m3/hourMax. Workshop Size 20m2Filtration Efficiency 95% @ 2 micron 80% @ 1 micron 65% @ 0.4 micronDust Holding Capacity 500g/m2Noise Level 60dbDimensions (WxDxH) 205 x 205 x 180mm Weight 3.3kgRating HobbyWarranty 1 YearEAN Barcode Number 5060486046270

Home Delivery

UK mainland delivery from £6.49

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this pagebookmark and share