Veritas

Veritas

Veritas

With nearly 200 tools in production, Veritas Tools is a world leader in woodworking tool product research, development and manufacturing. Producing tools to the highest standards, for complete satisfaction in use.

 

Veritas Categories

 

Veritas Products

Page: 1 | 2 | 3 | Next
Sort By:
  • display as grid Grid
  • display as list List
View: 12 | 24 | 48 | ALL
Veritas 05M09.03 Skew Registration Jig for MKII Honing Guide
Veritas 05M09.03 Skew Registration Jig for MKII Honing Guide
  The Veritas Skew Registration Jig locks into the Mk.II honing guide to make quick work of setting both skew and bevel angles (left- or right-hand) of chisel and plane blades. The jig's machined aluminum base provides skew angle markings that are laser etched for accuracy and legibility. The skew angle graduations cover the range of 10° to 45° in 5° increments, and there are additional marks...
£20.62inc vat
Veritas 05M09.01 MkII Honing System
Veritas 05M09.01 MkII Honing System
Key Features Increased range, capacity and accuracy Integral blade registration squares the blade and sets the bevel angle in one easy step Three bevel-angle range configurations Designed to accept flat and tapered blades, as well as blades with irregular geometry Three-position eccentric roller allows a micro-bevel to be honed quickly and accurately 50mm wide roller is stable for even...
£41.28inc vat
Veritas Mk.II Standard Narrow Blade Honing Guide Set
New
Veritas Mk.II Standard Narrow Blade Honing Guide Set
This honing guide overcomes the problem of accurately sharpening narrow blades. This unique guide consists of the narrow-blade clamping head, the standard roller base and the angle registration jig. The guide clamps blades from 3mm(1/8") to 38mm(1.1/2") wide. The specially designed parallel jaws ensure your blades stay square to the jig. The jig takes blades with bevelled or square edges. The canted...
£65.21inc vat
Veritas 05N10.10 Dovetail Markers - Pair
Veritas 05N10.10 Dovetail Markers - Pair
Key Features For quick and accurate marking of dovetails Supplied as a pair - 1:6 for softwoods and 1:8 for hardwoods Both measure 2" x 2" Anodized aluminium Engineer's corner on inside edges Colour coded for easy recognition For quick, accurate marking of dovetails, a dovetail marker is the best tool available. With riding ledges on both sides, these 2" x 2" markers can be flipped...
£8.12inc vat
 
Veritas 05N56.01 Saddle Square - Standard
Veritas 05N56.01 Saddle Square - Standard
Key Features Allow the scribing of two perpendicular surfaces at one time Made of anodized aluminium Version is available for stud wall layout Veritas® Saddle Square Transferring a line from one surface to another perpendicular surface with a small square is never easy. Try wrapping this line around all faces and you'll see how far off you can be. Our...
£9.20inc vat
Veritas 05N61.04 Dovetail Saddle Marker 1:6
Veritas 05N61.04 Dovetail Saddle Marker 1:6
Key Features Precision machined at the traditional 1:6 & 1:8 angles Long legs ensure accurate registration Continuous line can be transferred around the corner Straight and angled lines can be scribed simultaneously, ensuring alignment Inside corner is relieved to ensure flush seating even on saw whiskers Anodised aluminium, light and durable   For quick, accurate marking...
£9.20inc vat
Veritas 05N61.05 Dovetail Saddle Marker 1:8
Veritas 05N61.05 Dovetail Saddle Marker 1:8
Key Features Precision machined at the traditional 1:6 & 1:8 angles Long legs ensure accurate registration Continuous line can be transferred around the corner Straight and angled lines can be scribed simultaneously, ensuring alignment Inside corner is relieved to ensure flush seating even on saw whiskers Anodised aluminium, light and durable For quick, accurate marking of dovetails,...
£9.20inc vat
Veritas 05T02.02 1:8 Dovetail Guide
Veritas 05T02.02 1:8 Dovetail Guide
Veritas® Dovetail Saw Guide System Hand-cut dovetails remain the mark of the skilled cabinetmaker and a feature that buyers look for in high-end furniture. Veritas has developed a guide and saw system that lets amateurs achieve professional results. The system also allows the seasoned expert to produce dovetail joints more quickly and with less effort.   Clamped in position, the anodized aluminum...
£33.67inc vat
 
Veritas 05E14.01 Journeyman's Brass Mallet - 570g
Veritas 05E14.01 Journeyman's Brass Mallet - 570g
Key Features Brass head threaded to the handle for a secure fixing Cherry wood handle Veritas® Journeyman's Brass Mallet This mallet can be used with a traditional grip or it can be nestled in the palm of your hand to exactly control the force used, a position preferred by carvers and sculptors or anyone doing work finer than mortising. Unique to this type of mallet, the brass head has a...
£20.62inc vat
Veritas 05P20.01 Flush Plane
Veritas 05P20.01 Flush Plane
Key Features 50mm(2") wide Flush chisel - multitude of flush trimming uses Unrestricted travel to centre of widest boards Reversible blade to protect edge when not in use The Veritas® Flush Plane is ideal for flush trimming projections such as glue lines, laminate edges, and plugs. It can also be used for cleaning out inside corners (e.g., hinge gains, tenons, half-laps)....
£30.41inc vat
Veritas 05P29.01 Scraping Plane
Veritas 05P29.01 Scraping Plane
  Key Features The ideal tool for final smoothing Tear-out virtually eliminated with cutting action of included scraping blade Bubinga front knob and rear handle Integral thumbscrew to bow blade to eliminate ridges Instructions   The Veritas® scraping plane is the ideal tool for final smoothing — especially when you have to deal with highly figured wood or reversing grain....
£143.51inc vat
Veritas 05P29.50 Small Scraping Plane
Veritas 05P29.50 Small Scraping Plane
Key Features Designed for one-handed use Articulating palm rest for comfortable, controlled grip 50mm x 1mm thick high-carbon-steel blade Allows clean, accurate cuts flush against a perpendicular surface Blade is ground at 45°, allowing you to burnish a hook with ease The 135mm long ductile cast iron body, weight 700g Instructions Designed for one-handed use, this small scraping...
£76.63inc vat
 
Veritas 05P30.01 Jointer Fence
Best Seller
Veritas 05P30.01 Jointer Fence
Key Features Shoot accurate and consistent square or bevelled edges Integral rare earth magnets hold plane in position - easy to change Holes in fence for screwing wedge strips when planing other bevels Stop pin Black anodised aluminium with brass fittings   Planing a square edge on a board requires a jointer fence, whether you are using an electric jointer or a hand plane. The...
£36.38inc vat
Veritas 05P32.01 Low Angle Spokeshave
Veritas 05P32.01 Low Angle Spokeshave
Key Features Traditional design with blade set at 20° 25° micro bevel produces very clean cut Adjustable cutting depth via toe-piece Can be used for flat, convex or concave work Cast aluminium body High quality tool steel blade This spokeshave uses a basic traditional shape, not of the spokeshaves of the last century, but of the century before. Until about 1900, the vast majority...
£48.35inc vat
Veritas 05P32.05 Cabinet Scraper
Veritas 05P32.05 Cabinet Scraper
Key Features Smoothes glue lines or surfaces without tear-out, digs or gouges Allows pressure to be applied directly in line with the cutting edge 70mm wide blade, with both cutting edges ground at 45° Shaped to protect the upward-facing cutting edge Sole is surface ground for accuracy (80 x 85mm) Made from ductile cast iron Overall length 290mm. Weighs about 740g Made in Canada This...
£53.79inc vat
Veritas 05P32.06 Replacement Blade for Cabinet Scraper
Veritas 05P32.06 Replacement Blade for Cabinet Scraper
A replacement or spare blade for the Veritas Cabinet Scraper. This blade will also fit the Stanley number 80 cabinet scraper.
£9.20inc vat
 
Veritas 05P37.05 Bevel-Up Jointer Fence - B
Veritas 05P37.05 Bevel-Up Jointer Fence - B
Key Features Consistent and accurate square or bevelled edges 280mm long anodized aluminium Can be attached to either side of the plane The Veritas low-angle jointer fence enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer. The 11" long anodized aluminum fence can be attached to either side of the plane with the brass thumbscrews provided;...
£30.95inc vat
Veritas 05P38.01 Router PlaneVeritas 05P38.01 Router Plane
Veritas 05P38.01 Router Plane
Key Features Ductile cast iron body Ideal for cutting dados and grooves and inlay or intarsia work Spring-loaded collar holds the blade, allowing easy blade adjustment and removal Supplied with three blades Optional side fence available Instructions The Veritas router plane is an invaluable tool for work on stopped or through dadoes and grooves, or for any work that requires an area...
£119.58inc vat
Veritas 05P38.03 Replacement 1/4" Straight Blade for Router Plane
Veritas 05P38.03 Replacement 1/4" Straight Blade for Router Plane
High carbon steel cutters: a 6.35mm(1/4") forged straight blade, a two-piece 12.7mm(1/2") straight blade and a two-piece 12.7mm(1/2") pointed blade (for final smoothing). Two-piece blade makes sharpening a great deal easier.
£12.46inc vat
Veritas 05P38.04 Replacement 1/2" Straight Blade for Router Plane
Veritas 05P38.04 Replacement 1/2" Straight Blade for Router Plane
High carbon steel cutters: a 6.35mm(1/4") forged straight blade, a two-piece 12.7mm(1/2") straight blade and a two-piece 12.7mm(1/2") pointed blade (for final smoothing). Two-piece blade makes sharpening a great deal easier.
£11.91inc vat
 
Veritas 05P38.05 Replacement 1/2" Pointed Blade for Router Plane
Veritas 05P38.05 Replacement 1/2" Pointed Blade for Router Plane
High carbon steel cutters: a 6.35mm(1/4") forged straight blade, a two-piece 12.7mm(1/2") straight blade and a two-piece 12.7mm(1/2") pointed blade (for final smoothing). Two-piece blade makes sharpening a great deal easier.
£11.91inc vat
Veritas 05P38.07 Fence for Router Plane
Veritas 05P38.07 Fence for Router Plane
Stainless steel and aluminum Can be positioned on either side of the plane Work on both straight and curved pieces
£18.44inc vat
Veritas 05P38.08 Jig for 1/2" Blade for Router Plane
Veritas 05P38.08 Jig for 1/2" Blade for Router Plane
  A blade sharpening jig for 1/2" Blades
£3.76inc vat
Page: 1 | 2 | 3 | Next