• display as grid Grid
  • display as list List
Page: 1 | 2 |

Charnwood N3DJ Dovetail Jaws, serrated inside for Nexus3 Chuck
Charnwood N3DJ Dovetail Jaws, serrated inside for Nexus3 Chuck
Dovetail Jaws, serrated inside for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. Set of 4 optional jaws for our Nexus3 scroll chuck. These jaws are deeper than the standard dovetails jaws supplied with new chucks. The inside is parallel with power grip serrations for maximum strength. The inside of the jaw is 25mm deep. The outside is dovetailed...
£24.99 inc VAT
Charnwood N3EDJ Extended Dovetail Jaws, square hole inside for Nexus3 Chuck
Charnwood N3EDJ Extended Dovetail Jaws, square hole inside for Nexus3 Chuck
Extended Dovetail Jaws, square hole inside for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. A set of 4 optional jaws for our Nexus3 scroll chuck. These extended pin jaws are dovetailed on the outside. The internal edge is flat, forming a square when closed, perfect for gripping square shaped spigots. The jaws project 56mm from the base plate. Expands...
£24.99 inc VAT

Charnwood N3FJ10 Bowl Reversing Jaws 10" Diameter for Nexus3 Chuck
Charnwood N3FJ10 Bowl Reversing Jaws 10" Diameter for Nexus3 Chuck
Bowl Reversing Jaws 10" Diameter for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks. The outer edge of the jaws are 210mm diameter when closed, 237mm diameter...
£44.99 inc VAT
Charnwood N3FJ5 Bowl Reversing Jaws 5'' Diameter for Nexus3 Chuck
Charnwood N3FJ5 Bowl Reversing Jaws 5'' Diameter for Nexus3 Chuck
Bowl Reversing Jaws 5" Diameter for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks. The outer edge of the jaws are 120mm diameter when closed, 147mm diameter...
£24.99 inc VAT

Charnwood N3FJ8 Bowl Reversing Jaws 8" Diameter for Nexus3 Chuck
Charnwood N3FJ8 Bowl Reversing Jaws 8" Diameter for Nexus3 Chuck
Bowl Reversing Jaws 8" Diameter for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks. The outer edge of the jaws are 184mm diameter when closed, 211mm diameter...
£34.99 inc VAT
Charnwood N3ISJ Internal Step Jaws for Nexus3 Chuck
Charnwood N3ISJ Internal Step Jaws for Nexus3 Chuck
nternal Step Jaws for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. A set of 4 optional jaws for Nexus3 geared scroll chuck. The Internal step jaws have a dovetail on the outside and 3 separate dovetails on the inside. Projects 18mm from base plate. Expands from 84mm to 111mm 3 Steps Contract from 69mm/79mm/89mm to 42mm/52mm/62mm Jaws...
£24.99 inc VAT

Charnwood N3JJ Jumbo Jaws for Nexus3 Chuck
Charnwood N3JJ Jumbo Jaws for Nexus3 Chuck
Jumbo Jaws for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. A set of 4 optional jaws for Nexus3 geared scroll chuck. The jumbo jaws have a dovetail on the inside and outside of the leading edge. When nothing else is big enough, reach for the jumbo jaws!. Projects 12mm from base plate. Expands from 123mm to 150mm Contracts from 132mm...
£24.99 inc VAT
Charnwood N3LNJ Long Nose Jaws for Nexus3 Chuck
Charnwood N3LNJ Long Nose Jaws for Nexus3 Chuck
Long Nose Jaws for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. A set of 4 optional jaws for Nexus3 geared scroll chuck. The long nose jaws have a dovetail on the inside and outside of the leading edge. They also have a serrated grip running the length of the inside internally for when an extra strong grip is requied. Projects 50mm from...
£24.99 inc VAT

Charnwood N3PGJ Power Grip Jaws for Nexus3 Chuck
Charnwood N3PGJ Power Grip Jaws for Nexus3 Chuck
Power grip jaws for Nexus3 woodturning chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. Set of 4 optional jaws for Nexus3 geared scroll chuck. The power grip jaws have a dovetail on the inside and outside of the leading edge. They also have a serrated grip on the inside of the jaw for when an extra strong grip is requied. Projects 27mm from base plate. Expands...
£24.99 inc VAT
Charnwood N3PJ Pin Jaws For Nexus3 Chuck
Charnwood N3PJ Pin Jaws For Nexus3 Chuck
Pin Jaws for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. A set of 4 optional jaws for Nexus3 geared scroll chuck. Pin jaws allow smaller pieces to held than the standard jaws. The inside is smooth and parallel, the outside is serrated for maximum grip. The jaws project 25mm from the base plate. Expands from 24mm to 51mm Contracts from...
£24.99 inc VAT

Charnwood N3RJ Round Jaws, serrated both sides for Nexus3 Chuck
Charnwood N3RJ Round Jaws, serrated both sides for Nexus3 Chuck
Round Jaws, serrated both sides for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. A set of 4 optional jaws for our Nexus3 geared scroll chuck. These parallel sided jaws have a serrated edge both internally and externally for maximum gripping of both recesses and spigots. Jaw projects 14mm from the base plate. Expands from 46mm to 73mm Contracts...
£24.99 inc VAT
Charnwood N3RPJ Ripple Jaws for Nexus3 Chuck
Charnwood N3RPJ Ripple Jaws for Nexus3 Chuck
Ripple Jaws for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. A set of 4 optional jaws for the Nexus3 geared scroll chuck. The Ripple pattern on both the inside and outside of these jaws is designed to give a strong grip on rough or even bark covered wood. Jaws project 30mm from the base plate. Expands from 52mm to 79mm Contracts from...
£24.99 inc VAT

Charnwood N3SJ Stepped Jaws for Nexus3 Chuck
Charnwood N3SJ Stepped Jaws for Nexus3 Chuck
Stepped Jaws for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. A set of 4 optional jaws for our Nexus3 geared scroll chuck. The Stepped jaws have a serrated edge both internally and externally. They give great flexibility by combining standard sized jaws and pin jaws. Jaws project 24mm from base plate. Step 1 Expands from 19mm to 46mm Step...
£24.99 inc VAT
Charnwood N3WJ Wide Jaws for Nexus3 Chuck
Charnwood N3WJ Wide Jaws for Nexus3 Chuck
Wide Jaws for Nexus3 Chuck. Our N Type jaws are designed for use with our Nexus3 chuck as well as some other brands. A set of 4 jaws for Nexus3 geared scroll chuck. The Wide jaws have a serrated edge both internally and externally and can grip much larger pieces than the standard jaws. Projects 13mm from base plate. Expands from 89mm to 116mm Contracts from 102mm to 75mm Jaws for the Nexus3...
£24.99 inc VAT

Charnwood NEXUS3 95mm diameter, 4 Jaw Geared Scroll Chuck
Charnwood NEXUS3 95mm diameter, 4 Jaw Geared Scroll Chuck
Jaws for the Charnwood Nexus3 Chuck are also compatible with the following chucks: Record Power Supernova  Record Power G3 Nova   Robert Sorby Patriot
£89.99 inc VAT
Charnwood V2DJ Dovetail Jaws, Serrated inside
Charnwood V2DJ Dovetail Jaws, Serrated inside
Dovetail Jaws, serrated inside for Viper2 Chuck.
£14.99 inc VAT

Charnwood V2EDJ Extended Dovetail Jaws, Square hole inside
Charnwood V2EDJ Extended Dovetail Jaws, Square hole inside
Extended Dovetail Jaws, square hole inside for Viper2 Chuck.
£14.99 inc VAT
Charnwood V2FJ5 Bowl Reversing Jaws 5"
Charnwood V2FJ5 Bowl Reversing Jaws 5"
Bowl Reversing Jaws 5" Diameter for Viper2 Chuck
£24.99 inc VAT

Charnwood V2PJ Pin Jaws
Charnwood V2PJ Pin Jaws
Pin Jaws for Viper2 Chuck.
£14.99 inc VAT
Charnwood V2RJ Round Jaws, serrated both sides
Charnwood V2RJ Round Jaws, serrated both sides
Round Jaws, serrated both sides for Viper2 Chuck
£14.99 inc VAT

Charnwood V2RPJ Ripple Jaws
Charnwood V2RPJ Ripple Jaws
Ripple Jaws for Viper2 Chuck. Set of 4 optional jaws for the Viper2 geared scroll chuck. The Ripple pattern on both the inside and outside of these jaws is designed to give a strong grip on rough or even bark covered wood. Jaws project 24mm from the base plate. Expands from 42mm to 66mm Contracts from 54mm to 30mm
£14.99 inc VAT
Charnwood V2SJ Stepped Jaws
Charnwood V2SJ Stepped Jaws
Stepped Jaws for Viper2 Chuck
£14.99 inc VAT

Charnwood V2WJ Wide Jaws
Charnwood V2WJ Wide Jaws
Wide Jaws for Viper2 Chuck.
£14.99 inc VAT
Charnwood V3DJ Dovetail Jaws, Serrated inside
Charnwood V3DJ Dovetail Jaws, Serrated inside
Dovetail Jaws, serrated inside for Viper3 Chuck.
£24.99 inc VAT

Charnwood V3EDJ Extended Dovetail Jaws, Square hole inside
Charnwood V3EDJ Extended Dovetail Jaws, Square hole inside
Extended Dovetail Jaws, square hole inside for Viper3 Chuck.
£24.99 inc VAT
Charnwood V3FJ10 Bowl Reversing Jaws 10"
Charnwood V3FJ10 Bowl Reversing Jaws 10"
Bowl Reversing Jaws 10" Diameter for Viper3 Chuck.
£44.99 inc VAT

Charnwood V3FJ5 Bowl Reversing Jaws 5"
Charnwood V3FJ5 Bowl Reversing Jaws 5"
Bowl Reversing Jaws 5" Diameter for Viper3 Chuck.
£24.99 inc VAT
Charnwood V3FJ8 Bowl Reversing Jaws 8"
Charnwood V3FJ8 Bowl Reversing Jaws 8"
Bowl Reversing Jaws 8" Diameter for Viper3 Chuck.
£34.99 inc VAT

Charnwood V3PJ Pin Jaws
Charnwood V3PJ Pin Jaws
Pin Jaws for Viper3 Chuck.
£24.99 inc VAT
Charnwood V3RJ Round Jaws, serrated both sides
Charnwood V3RJ Round Jaws, serrated both sides
Round Jaws, serrated both sides for Viper3 Chuck. Set of 4 optional jaws for our Viper3 geared scroll chuck. These parallel sided jaws have a serrated edge both internally and externally for maximum gripping of both recesses and spigots. Jaw projects 14mm from the base plate. Expands from 46mm to 81mm Contracts from 67mm to 32mm Jaws for the Viper3 are compatible with the following chucks: Charnwood...
£24.99 inc VAT

Charnwood V3RPJ Ripple Jaws
Charnwood V3RPJ Ripple Jaws
Ripple Jaws for Viper3 Chuck. Set of 4 optional jaws for the Viper3 geared scroll chuck. The Ripple pattern on both the inside and outside of these jaws is designed to give a strong grip on rough or even bark covered wood. Jaws project 30mm from the base plate. Expands from 52mm to 87mm Contracts from 75mm to 40mm Jaws for the Viper3 are compatible with the following chucks: Charnwood W836 Vicmark...
£24.99 inc VAT
Charnwood V3SJ Stepped Jaws
Charnwood V3SJ Stepped Jaws
Ripple Jaws for Viper3 Chuck. Set of 4 optional jaws for the Viper3 geared scroll chuck. The Ripple pattern on both the inside and outside of these jaws is designed to give a strong grip on rough or even bark covered wood. Jaws project 30mm from the base plate. Expands from 52mm to 87mm Contracts from 75mm to 40mm Jaws for the Viper3 are compatible with the following chucks: Charnwood W836 Vicmark...
£24.99 inc VAT

Charnwood V3WJ Wide Jaws
Charnwood V3WJ Wide Jaws
Wide Jaws for Viper3 Chuck. Set of 4 optional jaws for Viper3 geared scroll chuck. The Wide jaws have a serrated edge both internally and externally and can grip much larger pieces than the standard jaws. Projects 13mm from base plate. Expands from 89mm to 124mm Contracts from 110mm to 75mm Jaws for the Viper3 are compatible with the following chucks: Charnwood W836 Vicmark VM100 (Requires...
£24.99 inc VAT
Charnwood V5DJ Dovetail Jaws, Serrated inside
Charnwood V5DJ Dovetail Jaws, Serrated inside
Dovetail Jaws, serrated inside for Viper5 Chuck. Set of 4 optional jaws for our Viper5 scroll chuck. These jaws are deeper than the standard dovetails jaws supplied with new chucks. The inside is parallel and serrated for maximum grip. The inside of the jaw is 25mm deep. The outside is dovetailed and projects 16mm from the base plate. Expands from 60mm to 118mm Contracts from 105mm to 47mm
£24.99 inc VAT

Charnwood V5EDJ Extended Dovetail Jaws, Square hole inside
Charnwood V5EDJ Extended Dovetail Jaws, Square hole inside
Extended Dovetail Jaws, square hole inside for Viper5 Chuck. Set of 4 optional jaws for our Viper5 scroll chuck. These extended pin jaws are dovetailed on the outside. The internal edge is flat, forming a square when closed, perfect for gripping square shaped spigots. The jaws project 57mm from the base plate. Expands from 22mm to 80mm Contracts from 68mm to 10mm
£24.99 inc VAT
Charnwood V5FJ10 Bowl Reversing Jaws 10"
Charnwood V5FJ10 Bowl Reversing Jaws 10"
Bowl Reversing Jaws 10" Diameter for Viper5 Chuck. Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks. The jaws are 210mm diameter when closed, 268mm diameter when opened. The work piece is held in place by 8 rubber coated fixings which can be fitted in 6 different...
£44.99 inc VAT

Charnwood V5PJ Pin Jaws
Charnwood V5PJ Pin Jaws
Pin Jaws for Viper5 Chuck. Set of 4 optional jaws for Viper5 geared scroll chuck. Pin jaws allow smaller pieces to held than the standard jaws. The inside is smooth and parallel, the outside is serrated for maximum grip. The jaws project 25mm from the base plate. Expands from 20mm to 78mm Contracts from 63mm to 5mm
£24.99 inc VAT
Charnwood V5RJ Round Jaws, serrated both sides
Charnwood V5RJ Round Jaws, serrated both sides
Round Jaws, serrated both sides for Viper5 Chuck. Set of 4 optional jaws for our Viper5 geared scroll chuck. These parallel sided jaws have a serrated edge both internally and externally for maximum gripping of both recesses and spigots. Jaw projects 18mm from the base plate. Expands from 65mm to 123mm Contracts from 105mm to 47mm
£24.99 inc VAT

Charnwood V5RPJ Ripple Jaws
Charnwood V5RPJ Ripple Jaws
Ripple Jaws for Viper5 Chuck. Set of 4 optional jaws for the Viper5 geared scroll chuck. The Ripple pattern on both the inside and outside of these jaws is designed to give a strong grip on rough or even bark covered wood. Jaws project 32mm from the base plate. Expands from 60mm to 118mm Contracts from 105mm to 47mm
£24.99 inc VAT
Charnwood V5SJ Stepped Jaws
Charnwood V5SJ Stepped Jaws
Stepped Jaws for Viper5 Chuck. Set of 4 optional jaws for our Viper5 geared scroll chuck. The Stepped jaws have a serrated edge both internally and externally. They give great flexibility by combining standard sized jaws and pin jaws. Jaws project 26mm from base plate. Step 1 Expands from 22mm to 80mm Step 2 Expands from 50mm to 108mm Contracts from 58mm to 0mm
£24.99 inc VAT

Charnwood V5WJ Wide Jaws
Charnwood V5WJ Wide Jaws
Wide Dovetail Jaws for Viper5 Chuck. Set of 4 optional jaws for Viper5 geared scroll chuck. The Wide jaws have a dovetail internally and externally and can grip much larger pieces than the standard jaws. Projects 15mm from base plate. Expands from 122mm to 180mm Contracts from 154mm to 96mm
£24.99 inc VAT
RP2000A Pin Jaw Set For RP2000 for Compact Scroll Chuck
RP2000A Pin Jaw Set For RP2000 for Compact Scroll Chuck
Designed for holding small pieces of work, these jaws feature teeth for extra hold on the external face and can hold internally down to 5 mm, while the external grip is 24 mm.
£19.99 inc VAT

RP2000B Step Jaw Set For RP2000 for Compact Scroll Chuck
RP2000B Step Jaw Set For RP2000 for Compact Scroll Chuck
Featuring two diameters to allow for greater flexibility. The internal and external faces feature teeth for superior gripping. Internal grip is 3 mm, while the external grips are 18 and 31 mm.
£19.99 inc VAT
RP2000C Wide Grip Jaw Set For RP2000 for Compact Scroll Chuck
RP2000C Wide Grip Jaw Set For RP2000 for Compact Scroll Chuck
Suitable for holding larger pieces of work, these jaws also have teeth on the internal and external faces to give extra grip. The internal grip is 55 mm and the external grip is 68 mm.
£19.99 inc VAT

RP2000D Remounting Jaw Set For RP2000 for Compact Scroll Chuck
RP2000D Remounting Jaw Set For RP2000 for Compact Scroll Chuck
These jaws can be used for contracting around the workpiece or expanding into it without leaving marks. They are ideal for remounting bowls and other items, such as goblet bases without marking, thanks to the rubber sleeved stops supplied with the jaws. Two sets of these stops are supplied – Eight standard length and eight long stops which give added grip. Each of the jaws features scribe...
£29.99 inc VAT
Record Power 62313 50 mm Standard JawsRecord Power 62313 50 mm Standard Jaws
Record Power 62313 50 mm Standard Jaws
Record Power 62313 50 mm Standard Jaws
£39.99 inc VAT

Record Power 62317 130 mm Dovetail JawsRecord Power 62317 130 mm Dovetail Jaws
Record Power 62317 130 mm Dovetail Jaws
Record Power 62317 130 mm Dovetail Jaws
£46.99 inc VAT
Record Power 62321 35 mm Standard JawsRecord Power 62321 35 mm Standard Jaws
Record Power 62321 35 mm Standard Jaws
These jaws are a smaller version of the standard 50 mm jaws, featuring the same dovetail profile in expansion and the superb grip of the hawk beak design on contraction. Designed specifically for smaller spigots and recesses, this set is incredibly versatile and makes a great addition to any turner’s tool collection. Expansion: 38 - 58 mm Contraction Spigot: 28 - 47 mm Contraction Square: 16...
£29.99 inc VAT
Page: 1 | 2 |