Description

Variable speed scroll saw.

• Quick Release Blade Tension
  
• For Use With Pin End And Plain End Blades
  
• Electronic Variable Speed Control
  
• Large Vibration Free Cast Iron Table
  
• Table Tilts Both Ways
  
• Transparent Blade Guard
  
• Adjustable Air Blower
  
• Sturdy Cast Iron Base
  
• Adjustable Rubber Feet
  
• Spare Blade Storage Compartment

A large precision ground cast iron table, gives this scroll saw a smooth cutting action without any vibration. Having electronic variable speed control allows the correct speed for the material being used to be selected at the turn of a dial.

The tilt mechanism for the table is a fantastic feature with tilting both left and right up to 45 degrees, with a large easy to read scale. There are preset stops at the most commonly used angles of 0,15,30 and 45 on each side.

An adjustable air blower is included to keep pencil lines clearly visible when cutting.

The Peugeot range of scroll saws use standard 127mm blades and can be used with both pin ended or plain ended blades. Pin ended blades are most widely used because they are quick and easy to fit. Just undo the blade tension using the quick release lever and hook the blade over the holder. Re-tension and the saw is ready. Plain ended blades are sometimes used when the job requires internal or pierced cuts. This can be quickly achieved without the use of any tools.

Dust can be collected through a 38mm diameter outlet on the side of the machine. Our 38mm hose will fit straight on, you will require a reducer if your extractor uses a different sized hose.

A handy built-in storage box will ensure your spare blades are always stored safely.

Supplied with 2 pin end blades, plain blade changing tool, cable and plug.

Specification