A bench top woodworking bandsaw with a 4'' cutting capacity. An ideal companion for woodturners.

• Precision Ground Cast Iron Work Table
  
• Quick Lock Fence Rip Fence
  
• Quiet Induction Motor
  
• Crosscutting Mitre Guide Included
  
• 4'' Cutting Depth Capacity
  
• 10'' Cutting Width (Throat)
  
• Primarily used for Woodworking

A small sized woodworking bandsaw with a durable precision ground cast iron tilting table with a stop for returning to 90 degrees after a bevel cut and two mitre fence slots. The quick release fence locks onto both front and rear of the table to provide a rigid straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting wood at any angle. The new rack & pinion blade guard design can be adjusted single handed using a dial on the side of the machine and is fitted with a scale to set the cutting height. Two side guide bearings and a rear thrust bearing on the end of the guard, control the bandsaw blade and keep it true. Finished off with a durable powder coated paint finish.

The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft woods. It is possible to use this bandsaw for cutting metal, but only with the correct blade fitted. (Not supplied)