A New design for 2010

For the small professional workshop this new cast iron table saw will be the perfect fit.

The main table is precision ground cast iron to give a flat surface that will last forever. The surface area is further increased with the addition of 2 steel extension tables offering greater support when working with larger panels and boards.

The guide fence for ripping operations slides smoothly along a solid steel bar with a measuring scale marked out in millimetres. The fence itself can be used in two positions, the second position allows for very thin cuts to be made in thin materials without obstructing the blade guard. A great feature of the fence system is the addition of a micro adjuster which allows accurate small adjustments to be made when setting the position of the fence.

On the left hand side of the saw is the sliding crosscut carriage. The table is again made from cast iron and precision ground for a durable flat surface. The table runs on four sealed for life bearings along an aluminium guide track. The fence itself can be locked at any angle from 90 to degrees, and there is a positive stop to ensure the fence returns back the the 90 degree position. A work clamp ensures timber stays locked in position during the cut. A flip-over length stop for accurate repeat cutting completes the carriage assembly.

The power is generated from a 1700w (2.1/4 hp) induction motor which gives a low noise level and will run from any standard 13amp, 240v power supply.
Setting the sawblade angle and height is done using two separate hand wheels. A large easy to read scale on the front face of the machine allows accurate bevel angles to be set.

Efficient dust extraction is included as standard. Dust is collected from the back of the saw guard and a hose transfers it to the rear of the machine. Underneath the table is a hood which collects more dust and tranfers it to the same collection point. A single extractor hose connection point of 100mm diameter is provided at the rear of the machine.

The table saw is supplied with four adjustable feet for levelling on an uneven surface. For anybody needing to move the saw around the workshop our universal wheel base, W520 is the ideal companion.

Supplied with 36 tooth TCT sawblade, push stick, cable and plug.

 

 

Specification:
Main Table Size	750mm x 1000mm
Maximum Ripping Width Using Fence	605mm
Crosscut Table Size	400mm x 180mm
Maximum Crosscutting Width	550mm (700mm Using Reverse Table)
Blade Tilt	0 - 45 degrees
Cutting Depth at 90 degrees	75mm
Cutting Depth at 45 degrees	45mm
Blade Diameter	254mm
Blade Bore	30mm
Work Table Height	830mm
Motor (induction)	1700w / 240v
Dimensions (WxDxH)	1440mm x 1070mm x 1120mm
Weight	125Kg
Rating	Trade