Lathe Centres

Page: 1 | 2 | Next
Sort By:
  • display as grid Grid
  • display as list List
View: 12 | 24 | 48 | ALL
PEN MANDREL SUPPORT CENTRE
PEN MANDREL SUPPORT CENTRE
The Pen Mandrel Support Centre has been designed and manufactured by PLANET here in the UK as an optimum way of holding and supporting the Pen Mandrel Shaft during the making of pens. This product is much the same as our Standard Rotating Centre (SD1/2), having 2 sealed bearings, a 12mm nose to represent 12mm bushings, is offered in 1MT & 2MT, precisely machined and designed to last and satisfy...
£27.88inc vat
Planet 0141B Piloted Drive Centre 1" (25.4mm)
Planet 0141B Piloted Drive Centre 1" (25.4mm)
1” diameter 4 prong head. Head relieved behind flutes to prevent binding. Supplied with inter-changeable point, pilot and hex key.
from £31.30inc vat
Planet 11222 Large Drive Centre 2 Prong 1 1/2" (38.1mm) 2MT
Planet 11222 Large Drive Centre 2 Prong 1 1/2" (38.1mm) 2MT
Suitable for all large types of spindle work.Integral points will not work loose. Removable with extractor ring.   4 prong for squared spindle ends, 2 prong for out of square spindle ends.
£36.70inc vat
 
Planet 11242 Large Drive Centre 4 Prong 1 1/2" (38.1mm) 2MT
Planet 11242 Large Drive Centre 4 Prong 1 1/2" (38.1mm) 2MT
Suitable for all large types of spindle work.Integral points will not work loose. Removable with extractor ring.   4 prong for squared spindle ends, 2 prong for out of square spindle ends.
£37.96inc vat
Planet 5161B Hollow Ring Centre 5/8" (15.9mm)
Planet 5161B Hollow Ring Centre 5/8" (15.9mm)
Facilitates the boring of long holes. 5/8” diameter head with 5/16” bore. Supplied complete with removable centre and hex key.   May also be used as a tail centre when there is risk of splitting.
from £21.40inc vat
Planet CR60 Detachable Ring Centre Accessory
Planet CR60 Detachable Ring Centre Accessory
May be placed over the cone of any 60 degree rotating tail centre to convert it to a rotating ring centre.   Helps prevent wood splitting due to the pressure of the centre.   Overall diameter 20mm.  
£9.23inc vat
Planet DX1 Deluxe Rotating Centre (60Deg) (12mm) 1MT
Planet DX1 Deluxe Rotating Centre (60Deg) (12mm) 1MT
Slim, Deluxe Rotating Centre. 12mm dia. nose with 60 deg. point. Main body remains stationary while small point turns. Ideal for smaller precision work as well as general spindle turning. Triple bearing design incorporating thrust race. Small rotating cone has been hardened to withstand against wear
£45.74inc vat
 
Planet DX2 Deluxe Rotating Centre (60Deg) (12mm) 2MT
Planet DX2 Deluxe Rotating Centre (60Deg) (12mm) 2MT
Slim, Deluxe Rotating Centre. 12mm dia. nose with 60 deg. point. Main body remains stationary while small point turns. Ideal for smaller precision work as well as general spindle turning.   Triple bearing design incorporating thrust race.   Small rotating cone has been hardened to withstand against wear
£45.74inc vat
Planet Finial Mandrel Kit
New
Planet Finial Mandrel Kit
A brand new product designed by Planet. The Finial Mandrel fits into the tail stock and offers support for the fine end of a finial whilst turning the rest of it. The Finial Mandrel Kit has 3 Delrin (nylon type) inserts with 3 sizes 3mm, 4.5mm & 6mm hole depending on the size of Finial being turned. They fit into the inner race of a free running bearing. Available in 1MT & 2MT
£33.49inc vat
Planet HC1 Halved Solid Centre 1MT
Planet HC1 Halved Solid Centre 1MT
Solid centre with nose ‘halved’. Facilitates turning of very small projects.   Enables tool access very close to centre.
£5.99inc vat
Planet HC2 Halved Solid Centre 2MT
Planet HC2 Halved Solid Centre 2MT
Solid centre with nose ‘halved’. Facilitates turning of very small projects.   Enables tool access very close to centre.
£7.20inc vat
 
Planet HD1 Heavy Duty Rotating Centre (60Deg) (36mm) 1MT
Planet HD1 Heavy Duty Rotating Centre (60Deg) (36mm) 1MT
Heavy Duty Rotating Centre. 36mm dia. head with 60 deg. point.   Designed for heavier turning work.   Triple bearing design, incorporating a substantial thrust race.  
£44.53inc vat
Planet HD2 Heavy Duty Rotating Centre (60Deg) (36mm) 2MT
Planet HD2 Heavy Duty Rotating Centre (60Deg) (36mm) 2MT
Heavy Duty Rotating Centre. 36mm dia. head with 60 deg. point.   Designed for heavier turning work.   Triple bearing design, incorporating a substantial thrust race.  
£44.53inc vat
Planet HRC1 Hollow Rotating Centre (60Deg) (31mm) 1MT
Planet HRC1 Hollow Rotating Centre (60Deg) (31mm) 1MT
Rotating centre with 5/16” bore for long hole boring.   Based around our standard duty configuration. Also useful for spindle turning when there is a danger of a centre point splitting the stock.   Set comprises: Hollow rotating centre, nose cone for use as standard centre, centring rod.
£44.53inc vat
Planet HRC2 Hollow Rotating Centre (60Deg) (31mm) 2MT
Planet HRC2 Hollow Rotating Centre (60Deg) (31mm) 2MT
Rotating centre with 5/16” bore for long hole boring.   Based around our standard duty configuration. Also useful for spindle turning when there is a danger of a centre point splitting the stock.   Set comprises: Hollow rotating centre, nose cone for use as standard centre, centring rod.
£44.53inc vat
 
Planet LBD1 Lace Bobbin Drive Centre 1/2" (12.7mm) 1MT
Planet LBD1 Lace Bobbin Drive Centre 1/2" (12.7mm) 1MT
Tapered drive for lace bobbins, etc.   Mouth of drive is 1/2” square
£20.93inc vat
Planet LBD2 Lace Bobbin Drive Centre 1/2" (12.7mm) 2MT
Planet LBD2 Lace Bobbin Drive Centre 1/2" (12.7mm) 2MT
Tapered drive for lace bobbins, etc.   Mouth of drive is 1/2” square
£21.76inc vat
Planet LD1 Light Duty Rotating Centre  (60Deg) (22mm) 1MT
Planet LD1 Light Duty Rotating Centre (60Deg) (22mm) 1MT
Light Duty Rotating centre. Designed to facilitate the turning of small items. 22mm dia. head with 60 deg. point. Twin deep groove ball races.
£20.42inc vat
Planet MC02A Multi Chuck Drive Centre 2 Prong 1" (25.4mm)
Planet MC02A Multi Chuck Drive Centre 2 Prong 1" (25.4mm)
Designed to be held in the jaws of a multi-chuck system. Enables between-centre turning to be carried out without unmounting the chuck.   Shank Diameter 18mm
£16.57inc vat
 
Planet MC04A Multi Chuck Drive Centre 4 Prong 1" (25.4mm)
Planet MC04A Multi Chuck Drive Centre 4 Prong 1" (25.4mm)
Designed to be held in the jaws of a multi-chuck system. Enables between-centre turning to be carried out without unmounting the chuck.   Shank Diameter 18mm
£16.57inc vat
Planet PM3S Pen Mandrel Spares - Spacers 3pc, Brass Nut 1pc
£6.14inc vat
Planet PM4C Pen Mandrel Spares - Cones 4pc
£4.02inc vat
Planet PM5BN Pen Mandrel Spares - Brass Nuts 5pc
£17.86inc vat
 
Page: 1 | 2 | Next