THIS ITEM IS UNAVAILABLE. YOU MAY BE INTERESTED IN ONE OF THESE ALTERNATIVES...

DRAPER 2000W Hot Air Gun
DRAPER 2000W Hot Air Gun
£28.51 inc VAT
Kreg Jig K5 Pocket Hole JigKreg Jig K5 Pocket Hole Jig
New
Kreg Jig K5 Pocket Hole Jig
£99.99 £74.99 inc VAT

HOT ROD JIG

No image available

Item: HR-JIG

MPN: HR/JIG

HOT ROD JIG

0
Write the first review

Product Description

Routing jig for routing grooves in solid work tops to accept 12mm diameter hot rods. Hot rods prevent heat damage to work surfaceAccepts hot rods of size 100mm, 200mm, 300mm and 400mmMade from 12mm hard wearing CNC machined solid phenolic plastic.Grooves at 50mm pitch.Series of peg holes at 50mm increments too allow recess at 90 degree to work surface or at 45 degree.Use Ref. C054AX1/2TC, R6.35mm cove (12.7mm diameter) for standard 12.7mm rods, or Ref. C053CX1/2TC, R6mm cove (12mm diameter) for 12mm rods. Use other cove cutters for other rod diameters. It is desirable to recess the rods into the worktop by approximately one third to one half of the rod diameter.Hot rods not included.

Additional

Groove pitch=50.0 mmGroove length=100, 200, 300 and 400 mmLength=700 mmWidth=390 mmThickness=12 mmWeight=3.5 kg