Flexcut

Flexcut

  • display as grid Grid
  • display as list List
Page: 1 | 2 |

Flexcut 75mm (3") Flexible Draw Knife with Sheath
Flexcut 75mm (3") Flexible Draw Knife with Sheath
Key Features Great for skinning bark and roughing-off corners This handy little draw knife was developed for fan carving but works great for skinning bark and chamfering edges.
£42.99 inc VAT
Flexcut Beginner 2-Blade Craft Carver Set
Flexcut Beginner 2-Blade Craft Carver Set
Our carving tutor Peter Berry designed and developed this package for Flexcut and thoroughly recommends the kit as an ideal introduction to the fascinating craft of woodcarving. It's supplied with two interchangeable carving blades together with an ABS handle so that as you gain experience, additions could easily be made from the extensive range of Flexcut SK blades. A basswood blank for a leaf carving...
£34.99 inc VAT

Flexcut Carving Knife Set 4pc
Flexcut Carving Knife Set 4pc
Key Features Cutting knife Detail knife Pelican Mini pelican Supplied in tool roll Four of the most popular of the Flexcut carving knives brought together in one set, complete with a top quality tool roll. The four designs are the Cutting Knife, Detail Knife, Pelican and Mini Pelican.
£99.99 inc VAT
Flexcut Hook Knife - Left Handed KNL26
Flexcut Hook Knife - Left Handed KNL26
Each carving knive is constructed with an Ash handle and a high carbon steel blade. The high carbon blade holds an edge extremely well and is easily maintained by simple stropping. Each blade is honed, polished and ready to go. The mini-knives have a smaller, faceted handle designed for multiple gripping styles. KNL26 Left-Handed Hook Knife The Hook Knife blade is curved, similar to a gouge,...
£24.99 inc VAT

Flexcut Hook Knife - Right Handed KN26
Flexcut Hook Knife - Right Handed KN26
Each carving knive is constructed with an Ash handle and a high carbon steel blade. The high carbon blade holds an edge extremely well and is easily maintained by simple stropping. Each blade is honed, polished and ready to go. The mini-knives have a smaller, faceted handle designed for multiple gripping styles. KN26 Right-Handed Hook Knife The Hook Knife blade is curved, similar to a gouge,...
£24.99 inc VAT
Flexcut KN11 Skew Knife
Flexcut KN11 Skew Knife
Key Features Features edge-holding steel found on other Flexcut tools Comfortable carved These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The KN11 Skew Knife is used for taking more vertical cuts where room is limited for a conventional whittling stroke. The comfortable carved handle allows for long periods of carving without fatigue.
£20.99 inc VAT

Flexcut KN12 Cutting Knife
Flexcut KN12 Cutting Knife
Key Features Features edge-holding steel found on other Flexcut tools Comfortable carved These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The KN12 Cutting Knife is a general purpose carving knife. Its more rounded point is very durable. A great beginners knife, 28mm blade length. The comfortable carved handle allows for long periods of carving without...
£22.99 inc VAT
Flexcut KN13 Detail Knife
Flexcut KN13 Detail Knife
Key Features Features edge-holding steel found on other Flexcut tools Comfortable carved These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The KN13 Detail Knife has a very fine point for making the very narrow cuts associated with detailing. Its straight 38mm blade can accommodate larger stock removal if needed. The comfortable carved handle allows...
£22.99 inc VAT

Flexcut KN14 Roughing Knife
Flexcut KN14 Roughing Knife
Key Features Features edge-holding steel found on other Flexcut tools Comfortable carved handle These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The comfortable carved handle allows for long periods of carving without fatigue. It features a straight 2" blade for heavier stock removal, with a rounded durable point.
£23.99 inc VAT
Flexcut KN15 Chip Carving Knife
Flexcut KN15 Chip Carving Knife
Key Features Features edge-holding steel found on other Flexcut tools Comfortable carved These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. This traditional chip carving knife is honed, polished and ready to carve. The comfortable carved handle allows for long periods of carving without fatigue.
£21.99 inc VAT

Flexcut KN20 Mini Chip Knife
Flexcut KN20 Mini Chip Knife
Key Features 16mm ultra thin blade Smaller handle with multiple control points KN20 Mini Chip Knife. The mini-chip carving knife has a 16mm ultra thin blade, making unwanted chipping in delicate cuts less likely. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions.
£21.99 inc VAT
Flexcut KN27 Mini Detail Knife
Flexcut KN27 Mini Detail Knife
Key Features Small 19mm straight blade Ultra-thin for very delicate cuts The mini-detail knife has the smallest 19mm straight blade. It is made from ultra-thin material so as not to disturb adjacent wood for very delicate cuts.
£27.99 inc VAT

FLEXCUT KN28 UPSWEEP KNIFE
FLEXCUT KN28 UPSWEEP KNIFE
All Flexcut knives are supplied razor sharp and ready for use Excellent choice for making concave, convex and shaving cuts Comfortable handle for prolonged use
£28.99 inc VAT
FLEXCUT KN32 DETAIL SKEW KNIFE
FLEXCUT KN32 DETAIL SKEW KNIFE
14.3mm (9/16") straight blade Excellent for fine eye detail and feathers when decoy carving The extended shank offers a deeper reach for the blade
£31.99 inc VAT

Flexcut KN33 Hooked Push Knife
Flexcut KN33 Hooked Push Knife
The KN33 hooked push knife is designed for cleaning stop cuts. For best results, the push blade is great for making concave, convex and shaving cuts. Excellent choice for making concave, convex, and shaving cuts Also designed for cleaning stop cuts
£31.99 inc VAT
Flexcut KN35 Fine Detail Knife
Flexcut KN35 Fine Detail Knife
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. Designed for making fine detail cuts, the user also has the ability to "choke up" on the blade for even more precise cuts. The handle shape holds like a pencil or conventional knife.+ Features edge-holding steel found on other Flexcut tools Comfortable handle for long periods of use
£29.99 inc VAT

Flexcut KN36 Radius Knife
Flexcut KN36 Radius Knife
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The Radius Knife has a curved bevel and blade for making push cuts, slice cuts and V-shaped cuts. The skewed curvature of the bevel allows for a rolling action and a different approach. The handle shape holds like a pencil or conventional knife.
£29.99 inc VAT
Flexcut KN37 Hooked Skew Knife
Flexcut KN37 Hooked Skew Knife
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The Hooked Skew Knife features a hooked radial bevel and is perfect for waterfowl carving and cleaning. It also can be used to make V-cuts using a rolling action. The handle shape holds like a pencil or conventional knife.
£29.99 inc VAT

Flexcut Left Handed Scorp - KNL22 (5mm)
Flexcut Left Handed Scorp - KNL22 (5mm)
These knives are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available in four profiles. Right-handed carvers: Choose a right-handed tool to cut towards you, choose a left-handed tool to cut away from you. Left-handed carvers should...
£24.99 inc VAT
Flexcut Left-Handed Carving Jack
Flexcut Left-Handed Carving Jack
Key Features A complete carving kit in you pocket! Blades firmly lock in both open and closed positions Supplied with Sliptrop honing device and Flexcut Gold polishing compound 6 separate blades: detail, straight, gouge, hook, V scorp, gouge scorp, straight chisel Leather holster for safe storage Full instructions included Flexcut have produced this multi-bladed pocket carving tool...
£179.99 inc VAT

Flexcut Pocket Jack
Flexcut Pocket Jack
Key Features A complete carving kit in your pocket An excellent companion for carving on the move Just over 85g Includes a Detail Knife, Straight Gouge, Scorp and V- Scorp A new addition to the Flexcut range, the Pocket Jack really is an excellent companion for carving on the move. The Pocket Jack includes 4 of the most frequently used blades from its bigger brother the Carvin’Jack....
£99.99 inc VAT
Flexcut Right Handed Scorp - KN22 (5mm)
Flexcut Right Handed Scorp - KN22 (5mm)
These knives are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available in four profiles. Right-handed carvers: Choose a right-handed tool to cut towards you, choose a left-handed tool to cut away from you. Left-handed carvers should...
£24.99 inc VAT

Flexcut Right Handed Scorp - KN23 (8mm)
Flexcut Right Handed Scorp - KN23 (8mm)
These knives are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available in four profiles. Right-handed carvers: Choose a right-handed tool to cut towards you, choose a left-handed tool to cut away from you. Left-handed carvers should...
£24.99 inc VAT
Flexcut Right-Handed Carving Jack
Flexcut Right-Handed Carving Jack
Key Features A complete carving kit in you pocket! Blades firmly lock in both open and closed positions Supplied with Sliptrop honing device and Flexcut Gold polishing compound 6 separate blades: detail, straight, gouge, hook, V scorp, gouge scorp, straight chisel Leather holster for safe storage Full instructions included Flexcut have produced this multi-bladed pocket...
£179.99 inc VAT

Flexcut Starter Knife Set KN500
Flexcut Starter Knife Set KN500
Key Features Excellent three knife starter set Contains: Cutting Knife, Detail Knife & Roughing Knife Honed and ready for use Flexcut Gold polishing compound included Flexcut have put together the perfect package to get you started in carving with knives. These knives are made with the same edge-holding properties as their gouges and chisels and come honed and ready for use. The...
£59.99 inc VAT
KN31 MINI DETAIL SKEW KNIFE
KN31 MINI DETAIL SKEW KNIFE
Small 9.5mm straight blade Excellent for fine eye detail and feathers when decoy carving The extended shank helps for a deeper reach of the blade
£31.99 inc VAT

FLEXCUT 4 PIECE SCULPTURE SET
FLEXCUT 4 PIECE SCULPTURE SET
Four larger sized Flexcut tools with larger handles Packed in wooden box
£129.99 inc VAT
Flexcut Detail Knife Set KN400
Flexcut Detail Knife Set KN400
Key Features Super sharp blades for precision cutting Comfortable handles for fatigue free carving Complete with sharpening compound A great little 3 piece detail carving knife set from Flexcut. As with all their edge tools, they are extremely comfortable to handle and will hold a razor sharp edge. The set contains the KN20 Mini chip knife, KN27 Mini detail knife, the extremely popular...
£89.99 inc VAT

Flexcut KN00 4pc Toolroll
Flexcut KN00 4pc Toolroll
Room for up to 4 Flexcut knives Helps protect the edges
£15.99 inc VAT
Flexcut KN600 Beginner Palm & Knife Set
Flexcut KN600 Beginner Palm & Knife Set
Key Features Great selection of palm tools and knives Excellent starter set for wood carving Flexcut tools are supplied honed and ready for use Set includes: KN12 Cutting Knife, KN13 Detail Knife, FR307 V-Tool, FR306 Gouge The Flexcut beginner palm and knife set is a great way to get started in this rewarding craft. It includes the most popular palm tools and knives from the Flexcut range....
£83.99 inc VAT

Flexcut Left Handed Scorp Set - 4 Piece
Flexcut Left Handed Scorp Set - 4 Piece
Key Features Designed to get into areas where full length tool will not fit Four profiles Profiled honing block provided These cleverly designed tools are, in essence, gouges set at right angles on the end of the tool and are designed to get into areas where a normal full length tool will not fit. Typical applications would be animal figures, the human form, decoys etc. where undercut...
£104.99 inc VAT
Flexcut Palm Tool Travel Set - 11 Piece
Flexcut Palm Tool Travel Set - 11 Piece
Excellent for carvers whilst travelling Palm handle 2 sets available with 4 or 10 interchangeable blades Pre-printed wooden blank Chisels can be used with Bosch Power Carver with 810480 Adaptor Description These two sets are an excellent idea for the carver who wants to practice his or her craft whilst on holiday, travelling or just at odd moments throughout the day. The sets consist of a...
£119.99 inc VAT

Flexcut Palm Tool Travel Set - 5 Piece
Flexcut Palm Tool Travel Set - 5 Piece
Excellent for carvers whilst travelling Palm handle 2 sets available with 4 or 10 interchangeable blades Pre-printed wooden blank Chisels can be used with Bosch Power Carver with 810480 Adaptor Description These two sets are an excellent idea for the carver who wants to practice his or her craft whilst on holiday, travelling or just at odd moments throughout the day. The sets consist of a...
£62.99 inc VAT
Flexcut Right Handed Scorp Set - 4 Piece
Flexcut Right Handed Scorp Set - 4 Piece
Key Features Designed to get into areas where full length tool will not fit Four profiles Profiled honing block provided These cleverly designed tools are, in essence, gouges set at right angles on the end of the tool and are designed to get into areas where a normal full length tool will not fit. Typical applications would be animal figures, the human form, decoys etc. where undercut...
£104.99 inc VAT

Flexcut SK110 Craft Carver Set
Flexcut SK110 Craft Carver Set
Key Features Interchangeable Palm Handle 3 Carving Blades in a safe pouch Bass Wood- Boot Shaped Blank Instructional DVD 16 Page Manual and Project Guide An excellent starter set of carving tools which includes a wooden blank and an instructional DVD to create an attractive project for yourself or to give as a gift. The set comprises a quick connect palm handle, two gouges, a skew chisel...
£44.99 inc VAT
Flexcut SK200 19 Piece Pocket Tool Roll
Flexcut SK200 19 Piece Pocket Tool Roll
Fits 18 unhandled gouges and one handle A quality tool roll to keep your range of Flexcut tools safe, to hand, clean and in order. Keep them all in one convenient tool roll. Fits 18 unhandled gouges and one handle. Tools not included.
£22.99 inc VAT

FLEXCUT STANDARD PALM SET FR310
FLEXCUT STANDARD PALM SET FR310
Great for those just getting started or those with more experience The handle fits comfortably in the palm, allowing for good control close to your work The five profiles can perform a variety of tasks and carve moderate detail
£94.99 inc VAT
Flexcut Whittler's Kit KN300
Flexcut Whittler's Kit KN300
Key Features Super sharp blades for precision cutting Comfortable handles for fatigue free carving Complete with sharpening compound Put on your Stetson, think of a tune to whistle, find yourself a comfortable chair in the sunshine and while away the hours with this perfect pair of knives for the whittling enthusiast. Kit contains a cutting knife, mini detail knife and a block of sharpening...
£57.99 inc VAT

Flexcut RG404 Roughing Gouge Set (4pc)
Flexcut RG404 Roughing Gouge Set (4pc)
Key Features Super sharp Flexcut blades Fit directly into Axminster AMT and Proxxon Power Carvers RG400, RG401, RG402, RG403 A set of Flexcut blades with end fittings that will fit directly into Proxxon Power Carvers. This 4 piece set is for removing larger amounts of waste wood. Includes: RG400, RG401, RG402, RG403.
£49.99 inc VAT
Flexcut SK100 Chisel Handle
Flexcut SK100 Chisel Handle
Key Features Comfortable textured plastic 3" long Takes any of the SK series chisel blades A comfortable textured plastic handle, 3" long, with a slot in the end to take any of the SK series chisel blades. Considerable economies can be made buying one handle to mount any number of the chisels and don't forget, the same chisels will go into the Bosch Power Carver as well, using the 810480...
£17.99 inc VAT

Flexcut SK102 Quick Connect Palm Handle
Best Seller
Flexcut SK102 Quick Connect Palm Handle
Key Features 50mm Quick connect ash handle Interchangeable with any unhandled palm tool Tool not included 2" Quick connect Ash handle for detail work. Interchangeable with any unhandled palm tool. Tool not included.
£17.99 inc VAT
Flexcut SK103 Connect Power Handle
Flexcut SK103 Connect Power Handle
Key Features 4.1/2" Ash handle Fits any unhandled palm tool Added length allow for greater power for larger tools SK103 Quick Connect Power Handle for mallet work. This 115mm(4.1/2") Ash handle has the same ease of inserting and removing the tool as our other QC handles. Its added length allow for greater power for larger tools. Fits any unhandled palm tool. Tool not included.
£17.99 inc VAT

Flexcut SK305 Chisel - Sweep 3 x 9.5mm(3/8")
Flexcut SK305 Chisel - Sweep 3 x 9.5mm(3/8")
Key Features • Fit into Flexcut handle for hand carving • Adaptors can be used for Power Carving The Flexcut SK chisels will fit into the Flexcut handles for carving by hand or, by using the adaptors, into a Power Carver.
£15.99 inc VAT
Flexcut SK307 Chisel - 70° Vee x 1/4"(6mm)
Flexcut SK307 Chisel - 70° Vee x 1/4"(6mm)
Key Features • Fit into Flexcut handle for hand carving • Adaptors can be used for Power Carving The Flexcut SK chisels will fit into the Flexcut handles for carving by hand or, by using the adaptors, into a Power Carver.
£15.99 inc VAT

Flexcut SK309 Chisel - Sweep 11 x 1/8"(3mm)
Flexcut SK309 Chisel - Sweep 11 x 1/8"(3mm)
Key Features • Fit into Flexcut handle for hand carving • Adaptors can be used for Power Carving The Flexcut SK chisels will fit into the Flexcut handles for carving by hand or, by using the adaptors, into a Power Carver.
£16.99 inc VAT
Flexcut SK317 Chisel - 45° Vee x 4mm(5/32")
Flexcut SK317 Chisel - 45° Vee x 4mm(5/32")
• Fit into Flexcut handle (810478) for hand carving • 810480 adaptor available for the Bosch or Skil Power Carvers Description The Flexcut SK chisels will fit into the Flexcut handle (810478) for carving by hand or, by using the 810480 adaptor, into the Bosch or Skil Power Carvers.
£17.99 inc VAT

Flexcut SK329 Chisel - Straight 1/4"
Flexcut SK329 Chisel - Straight 1/4"
• Fit into Flexcut handle (810478) for hand carving • 810480 adaptor available for Bosch or Skil power carvers Description The Flexcut SK chisels will fit into the Flexcut handle (810478) for carving by hand or, by using the 810480 adaptor, into the Bosch or Skil power carvers.
£15.99 inc VAT
Flexcut SK400 Chisel - Sweep 3 x 15mm(5/8")
Flexcut SK400 Chisel - Sweep 3 x 15mm(5/8")
• Fit into Flexcut handle (810478) for hand carving • 810480 adaptor can be used with Bosch Power Carver Description The Flexcut SK chisels will fit into the Flexcut handle (810478) for carving by hand or, by using the 810480 adaptor, into the Bosch or Skil power carvers.
£17.99 inc VAT
Page: 1 | 2 |
 

Flexcut Categories