Charnwood W020 Cast Iron Floorstanding Router Table

Charnwood Charnwood W020 Cast Iron Floorstanding Router Table

Item: W020

Charnwood W020 Cast Iron Floorstanding Router Table

0
Write the first review

Online Only - Not Available In store

available Available

£269.99 inc VAT
You may also need:

add to wish list
updown

Product Description

NEW 2016 features include

  • Large Fence, 2 x 460mm x 150mm
  • Two adjustable vertical hold down featherboards
  • Adjustable horizontal featherboard
  • Set of four fence shims to allow the outfeed fence to be stepped out up to 4.5mm
  • Centralising jig to allow the router to be easily lined up in the centre of the aperture
  • Redesigned universal router clamps to allow removal and refitting of the router in under a minute without losing your settings
  • Scale mounted in the table for setting the fence 

A heavy weight router table with a solid one piece cast iron top.

  • Precision Ground Cast Iron Table
  • Hinged Top for Access to Router
  • Large fence
  • Spring Loaded Featherboards
  • T-Slot Mitre Guide  
  • 68mm Diameter Extraction Outlet
  • Floorstand Included

The rigid steel floorstand provides a comfortable working height for handling large panels. The table top is hinged to the floorstand and can be raised up, using the lifting handles provided, making the router more accessible when adjustments are needed. The table aperture is 100mm diameter with insert rings provided to reduce this size when using smaller diameter cutters.
Secure clamping of the work piece is achieved by setting the 2 fence mounted featherboards, to hold the work down against the table top and the front featherboard to hold the work up against the fence. Using this method edge mouldings can safely be cut onto small pieces such as beading or picture frames.
There is also a scale mounted into the table to act as a guide when setting the fence.

The new centralising jig allows you to set your router accurately into the middle of the aperture within seconds. It also holds the router in place whilst you set the clamps underneath the table so you no longer need 2 pairs of hands!
The new router clamps have also had the slot increased so that you can easily remove the router and then refit without losing your settings saving time and effort.

For the odd job where the whole face is being removed, a set of shims are supplied that can be added to the outfeed fence to step it out and provide support to the work piece. Four shims are supplied allowing up to a 4.5mm step in 0.5mm increments.
The cast metal mitre fence runs in a T-slot and is particularly accurate on this model. The guide swings from 90 to 30 degrees each way with locater stops at 45 degrees and a further stop at 90 degrees for accurate end grain work.
The clamping system, used to attach the router to the table, is universal allowing any sized router from any manufacturer to be used.

Supplied with 4 rubber feet, mitre guide, 68mm extraction outlet and insert rings.

Specification

Table size 680mm x 510mm
Table height 860mm
Cutter aperture 30mm, 60mm & 100mm
Dimensions (WxDxH) 860mm x 660mm x 1120mm
Weight 75kg
Rating Trade
Warranty  1 Year

Video

Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from £39.99

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this pagebookmark and share