Charnwood Sale!

Sort By:
  • display as grid Grid
  • display as list List
View: 12 | 24 | 48 | ALL
Charnwood 10" Table Saw with Floorstand & Extension TablesCharnwood 10" Table Saw with Floorstand & Extension Tables
Charnwood 10" Table Saw with Floorstand & Extension Tables
Charnwood W616 10" Table Saw with Floorstand & Extension Tables
£229.99inc vat
Charnwood High Filtration Vacuum Extractor DC50
Charnwood High Filtration Vacuum Extractor DC50
Charnwood DC50 Dust Extractor
£109.99inc vat
Charnwood NEXUS3 95mm diameter, 4 Jaw Geared Scroll Chuck
Charnwood NEXUS3 95mm diameter, 4 Jaw Geared Scroll Chuck
Jaws for the Charnwood Nexus3 Chuck are also compatible with the following chucks: Record Power Supernova  Record Power G3 Nova   Robert Sorby Patriot
£89.99inc vat
 
Charnwood Pillar Drill
Charnwood Pillar Drill
Modern stylish design, 16mm Capacity. Although the basic design of pillar drills has remained unchanged for many years, there are some well thought out modern design features on these two models, which set them apart from the norm. The large diameter operating handle is made from a strong yet lightweight aluminium casting allowing for a finer degree of control over the cutting tool. The setting of...
£207.99inc vat
Charnwood V2ALU Aluminium case
Charnwood V2ALU Aluminium case
    Alluminium storage case for the VIPER2 chuck.
£11.99inc vat
Charnwood V5DJ Dovetail Jaws, Serrated inside
Charnwood V5DJ Dovetail Jaws, Serrated inside
Dovetail Jaws, serrated inside for Viper5 Chuck. Set of 4 optional jaws for our Viper5 scroll chuck. These jaws are deeper than the standard dovetails jaws supplied with new chucks. The inside is parallel and serrated for maximum grip. The inside of the jaw is 25mm deep. The outside is dovetailed and projects 16mm from the base plate.  Expands from 60mm to 118mm Contracts from 105mm to 47mm
£24.99inc vat
 
Charnwood V5EDJ Extended Dovetail Jaws, Square hole inside
Charnwood V5EDJ Extended Dovetail Jaws, Square hole inside
Extended Dovetail Jaws, square hole inside for Viper5 Chuck. Set of 4 optional jaws for our Viper5 scroll chuck. These extended pin jaws are dovetailed on the outside. The internal edge is flat, forming a square when closed, perfect for gripping square shaped spigots. The jaws project 57mm from the base plate. Expands from 22mm to 80mm Contracts from 68mm to 10mm
£24.99inc vat
Charnwood V5FJ10 Bowl Reversing Jaws 10"
Charnwood V5FJ10 Bowl Reversing Jaws 10"
Bowl Reversing Jaws 10" Diameter for Viper5 Chuck. Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks. The jaws are 210mm diameter when closed, 268mm diameter when opened. The work piece is held in place by 8 rubber coated fixings which can be fitted in 6 different...
£44.99inc vat
Charnwood V5IP Indexing Plate
Charnwood V5IP Indexing Plate
Indexing Plate for Viper5 Chuck. The indexing plate fits onto the back of the Viper5 chuck, replacing the blank plate supplied as standard. It has 24 numbered positions set out at 15 degree intervals. Each position has a pin hole in the back of the plate and a slot in the side of the plate. An indexing attachment can then be used to add decorative features to a spindle or bowl at set intervals. The...
£9.99inc vat
 
Charnwood V5PJ Pin Jaws
Charnwood V5PJ Pin Jaws
Pin Jaws for Viper5 Chuck. Set of 4 optional jaws for Viper5 geared scroll chuck. Pin jaws allow smaller pieces to held than the standard jaws. The inside is smooth and parallel, the outside is serrated for maximum grip. The jaws project 25mm from the base plate. Expands from 20mm to 78mm Contracts from 63mm to 5mm
£24.99inc vat
Charnwood V5RJ Round Jaws, serrated both sides
Charnwood V5RJ Round Jaws, serrated both sides
Round Jaws, serrated both sides for Viper5 Chuck. Set of 4 optional jaws for our Viper5 geared scroll chuck. These parallel sided jaws have a serrated edge both internally and externally for maximum gripping of both recesses and spigots. Jaw projects 18mm from the base plate. Expands from 65mm to 123mm Contracts from 105mm to 47mm
£24.99inc vat
 
Charnwood W012 Benchtop Router Table
Charnwood W012 Benchtop Router Table
  Will Accept Any 1/4" Router MDF Table 2 Hold Down Clamps Horizontal Feather Board Cutter Guard 40mm Diameter Dust Collection Outlet   Bench top universal router table for use with any 1/4" router A router table will convert a hand held plunging router into a stationary tool which is safer to use and quicker to set up than using freehand. Ideally suited for all 1/4" sized...
£54.99inc vat
Charnwood W413 305mm (12") Disc Sander
Charnwood W413 305mm (12") Disc Sander
Key Features Quiet Induction Motor Large area work table Stable Base Design Disc Guarding for Educational Use The large base on this Disc Sander gives a very stable platform to work on. Fixing holes are also provided for bolting it to a work bench. A powerful 1hp induction motor turns the disc, which is specially produced to run at a slow 1400rpm to avoid burning during sanding.   The...
£189.99inc vat
Charnwood W590 12'' x 9'' Planer ThicknesserCharnwood W590 12'' x 9'' Planer Thicknesser
Charnwood W590 12'' x 9'' Planer Thicknesser
Charnwood W590 12'' x 9'' Planer Thicknesser
£1519.99inc vat
 
Charnwood W650 10" Table Saw Sliding Carriage + Extension Super Package Deal!Charnwood W650 10" Table Saw Sliding Carriage + Extension Super Package Deal!
Sale
£999.99 £959.99inc vat
Charnwood W660 Panel Saw with Sliding BeamCharnwood W660 Panel Saw with Sliding Beam
Charnwood W660 Panel Saw with Sliding Beam
New for 2014. 3hp Induction Motor Cast Iron table saw 4’ Travel Sliding Beam Rip Fence with Micro Adjuster All Extension Tables Included Mitre Fence Included Based on our best selling 10” Table Saw, we have increased the specification by adding a more powerful motor and a sliding beam with a 1220mm length of cut. This makes the saw ideal for handling large panels, anything up...
£1139.99inc vat
 
Charnwood W660 Panel Saw with Sliding Beam EX DISPLAY
Sale
£1057.04 £999.99inc vat
Charnwood W711 8" BandsawCharnwood W711 8" Bandsaw
Charnwood W711 8" Bandsaw
Home workshop bench top woodworking bandsaw, light enough to move off the bench after use. Precision Ground Cast Iron Table Quick Lock Fence Quiet Induction Motor Crosscutting Mitre Guide Included 3'' Cutting Depth 8" Cutting Width (Throat) Supplied with a High Quality Blade A compact sized yet accurate cutting woodworking bandsaw with a durable precision ground cast iron tilting table,...
£154.99inc vat
Charnwood W721 12" Bandsaw 750W 230VCharnwood W721 12" Bandsaw 750W 230V
Charnwood W721 12" Bandsaw 750W 230V
Charnwood W721 12" Bandsaw For woodworking
£379.99inc vat
 
Framers Corner PFK04 Deluxe Picture Frame Assembly Kit
Best Seller
Framers Corner PFK04 Deluxe Picture Frame Assembly Kit
  The latest addition to our range of picture framing tools allowing the hobby framer or artist to be able to join professional looking frames at home. The frame clamp has a quick action mechanism to quickly and securely hold the two mitred pieces of moulding. Once clamped, the corner is turned upside down and positioned on the non-slip base and up against the fence for accurate location of...
£68.99inc vat
Planer Setting Jig
Planer Setting Jig
    A Pair of magentic planer knife setting tools. When fitting new planer knives, or re-fitting knives which have been sharpened, it is very important that they are re-set correctly. Each blade must protrude from the cutterblock by the same amount to give a clean cut. Incorrectly set blades will cause an imbalance and a vibration which could damage the machine. The setting jig has...
£29.99inc vat
W590/1 Planer Knives 310 x 25 x 3.15mm HSS
W590/1 Planer Knives 310 x 25 x 3.15mm HSS
A set of 3 planer thicknesser knives made from HSS (High speed steel) to suit W590 planer thicknesser. Single edged. Size 310mm x 25mm x 3.15mm For use with Charnwood model W590 12" Planer thicknesser.
£54.99inc vat