Stock No. TRE10/10X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE10/11X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE10/12X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE11/17X1/4TC Useful for bevelling thick timbers.
Certain sizes can be used for jointing, boxes, pilasters and carcassing.
Ideal for use by wood turners with ...
Stock No. TRE11/1X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE11/1X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE11/30X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE11/3X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE11/3X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE11/3X8MMTC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE11/5X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE11/5X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE11/5X8MMTC Use for bevelling, chamfering and for producing mortar grooves.
Approx. 1.0mm flat will be found on nose.
Ref. 11/3 is ideal for imitating 'V' j...
Stock No. TRE46/360X1/2TC Ideal for newel posts and caps for stairs.
Supplied with one bearing.
Dimensions:
D=35.1 mm
C=12 mm
C2=16 mm
B=12.7 mm
A=45 degrees
Shank ...
Stock No. TRE765X1/2TC Adjustable trimmer will trim and bevel the top and bottom edges of the workpiece.
The width of workpiece accommodated can be adjusted with spacers. ...
Stock No. TRE767X1/2TC This adjustable chamfer set can be used to produce chamfers on the top and bottom edges.
The width of timber accommodated by the cutter can be vari...
Stock No. TREC044X1/2TC For veining, panelling, 'V' grooving, bevelling & chamfering.
Dimensions:
D=1/2 inch
D=12.7 mm
C=15/64 inch
C=6 mm
A=45 degrees
Shank Diamete...
Stock No. TREC046X1/4TC Two flute cutters for producing extra clean cut bevelled edges.
No plunge cut.
Dimensions:
D=7/8 inch
D=22.2 mm
C=25/64 inch
C=10 mm
A=67...
Stock No. TREC047X1/4TC Two flute cutters for producing extra clean cut bevelled edges.
No plunge cut.
Dimensions:
D=1 inch
D=25.4 mm
C=25/64 inch
C=10 mm
A=60 d...
Stock No. TREC048X1/4TC Two flute cutters for producing extra clean cut bevelled edges.
No plunge cut.
Dimensions:
D=1 3/8 inch
D=34.9 mm
C=25/64 inch
C=10 mm
A=...
Stock No. TREC138X1/4TC Ideal for posts and newel caps for stairs.
Dimensions:
C=1/2 inch
C=12.7 mm
B=9.5 mm
A=60 degrees
Shank Diameter=1/4 inch
Shank Diameter:...
Stock No. TREC138X8MMTC Ideal for posts and newel caps for stairs.
Dimensions:
C=1/2 inch
C=12.7 mm
B=9.5 mm
A=60 degrees
Shank Diameter=8 mm
Shank Diameter: 8 m...
Stock No. TREC139X1/4TC Ideal for posts and newel caps for stairs.
Dimensions:
C=9/32 inch
C=7 mm
B=9.5 mm
A=30 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1...
Stock No. TRETR22X1/4TC Ideal for fast chamfering to remove edge on timber or create a decorative edge.
Dimensions:
D=1/2 inch
D=12.7 mm
Overall length=53 mm
A=45 degr...
Stock No. TRETR22X8MMTC Ideal for fast chamfering to remove edge on timber or create a decorative edge.
Dimensions:
D=1/2 inch
D=12.7 mm
Overall length=53 mm
A=45 degr...
Stock No. TRETR33X1/4TC Ideal for fast chamfering to remove edge on timber or create a decorative edge.
Dimensions:
D=1 1/4 inches
D=31.8 mm
Overall length=62 mm
B=9.5...
