Stock No. TRE10/25X1/2TC Two flute straight cutter with 3 degree taper.
Designed for constructing wooden vacuum forming moulds.
Tapered sides will allow the mould to relea...
Stock No. TRE10/26X1/2TC Two flute straight cutter with 3 degree taper.
Designed for constructing wooden vacuum forming moulds.
Tapered sides will allow the mould to relea...
Stock No. TRE21/1X1/2TC Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=3/4 inch
D=19....
Stock No. TRE21/1X1/4TC Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=3/4 inch
D=19....
Stock No. TRE21/2X1/2TC Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=1 inch
D=25.4 ...
Stock No. TRE21/3X1/2TC Template thickness should be 5mm thicker than cut length of cutter.
Can be used to rout both tenons and housings.
Dimensions:
D=1 1/2 inch
D=3...
Stock No. TRE34/90X1/2TC To produce grooves for the insertion of coloured or natural wood inlay.
Supplied with three bearings to allow different depths of cut.
Alternative b...
Stock No. TRE34/90X12MMTC Designed for routing Corian, which is used in many bathrooms and kitchens.
Dimensions:
D=22.2 mm
N=19.0 mm
C=6.35 mm
B=12.7 mm
B2=16.0 mm
...
Stock No. TRE34/91X1/2TC To produce grooves for the insertion of coloured or natural wood inlay.
Supplied with three bearings to allow different depths of cut.
Alternative b...
Stock No. TRE34/91X12MMTC Designed for routing Corian, which is used in many bathrooms and kitchens.
Dimensions:
D=22.2 mm
N=19.0 mm
C=1/2 inch
C=12.7 mm
B=12.7 mm...
Stock No. TRE34/92X1/2TC To produce grooves for the insertion of coloured or natural wood inlay.
Supplied with three bearings to allow different depths of cut.
Alternative b...
Stock No. TRE34/92X12MMTC Designed for routing Corian, which is used in many bathrooms and kitchens.
Dimensions:
D=22.2 mm
Neck=19.0 mm
C=19 mm
OL=88 mm
B=12.7 mm
...
Stock No. TRE36/10X1/4TC Recessing cutter for producing double rebates.
For producing recesses with a lower rebate.
Designed to accept library/bookcase strip. Ref. 36/19 i...
Stock No. TRE36/19X1/2TC Recessing cutter for producing double rebates.
For producing recesses with a lower rebate.
Designed to accept library/bookcase strip. Ref. 36/19 i...
Stock No. TRE36/19X1/4TC Recessing cutter for producing double rebates.
For producing recesses with a lower rebate.
Designed to accept library/bookcase strip. Ref. 36/19 i...
Stock No. TRE36/1X1/4TC Recessing cutter for producing double rebates.
For producing recesses with a lower rebate.
Designed to accept library/bookcase strip. Ref. 36/19 i...
Stock No. TRE36/2X1/2TC Recessing cutter for producing double rebates.
For producing recesses with a lower rebate.
Designed to accept library/bookcase strip. Ref. 36/19 i...
Stock No. TRE36/2X1/4TC Recessing cutter for producing double rebates.
For producing recesses with a lower rebate.
Designed to accept library/bookcase strip. Ref. 36/19 i...
Stock No. TRE36/3X1/4TC Recessing cutter for producing double rebates.
For producing recesses with a lower rebate.
Designed to accept library/bookcase strip. Ref. 36/19 i...
Stock No. TREABSS2/61X1/4STC Used to slot and trim low melting point plastics such as ABS, Styrene and PVC.
For maximum life these cutters are Solid Carbide.
Single flute fo...
Stock No. TREABSS3/22X1/4STC Used to slot and trim low melting point plastics such as ABS, Styrene and PVC.
For maximum life these cutters are Solid Carbide.
Two flute for f...
Stock No. TREACR2/80X1/2TC Single flute for fast cutting.
Specially ground for cutting acrylic.
Cutter ref ACR2/80 can be used on phenolic resin.
Dimensions:
D=1/2 inc...
Stock No. TREACR3/20X1/4STC Two flute for fine finish.
Specially ground for cutting acrylic.
Cutter ref ACR3/81 can be used on phenolic resin.
Dimensions:
D=1/4 inch
D...
Stock No. TREACR3/81X1/2TC Two flute for fine finish.
Specially ground for cutting acrylic.
Cutter ref ACR3/81 can be used on phenolic resin.
Dimensions:
D=1/2 inch
D...
Stock No. TREACRS2/60X1/4STC Single flute for fast cutting.
Specially ground for cutting acrylic.
Cutter ref ACR2/80 can be used on phenolic resin.
Dimensions:
D=1/4 inc...
Stock No. TREACRS2/6X1/4STC Single flute for fast cutting.
Specially ground for cutting acrylic.
Cutter ref ACR2/80 can be used on phenolic resin.
Dimensions:
D=1/4 inc...
Stock No. TREACRS3/22X1/4TC Two flute for fine finish.
Specially ground for cutting acrylic.
Cutter ref ACR3/81 can be used on phenolic resin.
Dimensions:
D=1/4 inch
D...
Stock No. TRES60/03X1/4STC Up-cut helical gives long lasting super fine finish.
Dimensions:
D=3 mm
C=15/32 inch
C=12 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
...
Stock No. TRES60/04X1/4STC Up-cut helical gives long lasting super fine finish.
Dimensions:
D=5/32 inch
D=4 mm
C=15/32 inch
C=14 mm
Shank Diameter=1/4 inch
Shank Di...
Stock No. TRES60/05X1/4STC Up-cut helical gives long lasting super fine finish.
Dimensions:
D=13/64 inch
D=5 mm
C=3/4 inch
C=19 mm
Shank Diameter=1/4 inch
Shank Dia...
Stock No. TRES60/06X1/4STC Up-cut helical gives long lasting super fine finish.
Dimensions:
D=15/64 inch
D=6 mm
C=3/4 inch
C=19 mm
Shank Diameter=1/4 inch
Shank Dia...
Stock No. TRES60/1LHX1/4STC Down-cut helical gives long lasting super fine finish on fine acrylics. Prevents vibration.
Dimensions:
D=1/4 inch
D=6.3 mm
C=19 mm
Shank Diam...
Stock No. TRES60/1X1/4STC Up-cut helical gives long lasting super fine finish.
Dimensions:
D=1/4 inch
D=6.3 mm
C=19 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
...
Stock No. TRETM/ACR/3 Square sheet of clear acrylic for use when making routing templates and jigs.
Can be sawn, routed with TCT tools and drilled easily.
Dimensions:...
Stock No. TRETM/ACR/6 Square sheet of clear acrylic for use when making routing templates and jigs.
Can be sawn, routed with TCT tools and drilled easily.
Dimensions:...
Stock No. TRETM/ACR/8 Square sheet of clear acrylic for use when making routing templates and jigs.
Can be sawn, routed with TCT tools and drilled easily.
Dimensions:...
