Stock No. TRECR/KB/PK1 Made from reinforced plastic and have a steel stud. Dimensions:Thread=M6Thread length=20 mmH=14 mmD=31 mmPack of 10Diameter Metric: 31Diameter 2 Metri...
Stock No. TRECR/KB/PK2 Made from reinforced plastic and have a steel stud.Dimensions:Thread=M6Thread length=15 mmH=20mmD=30mmPack of 10Diameter Metric: 30Diameter 2 Metric: ...
Stock No. TRECR/KB/PK3 Made from reinforced plastic and have a steel stud.
Dimensions:
Thread=M8
Thread length=36 mm
H=27 mm
D=40 mm
Pack of 10
Diameter Metric...
Stock No. TRECR/KB/PK4 Made from reinforced plastic and have a steel insert.
Dimensions:
Thread=M6
Thread Length=30 mm
H=31 mm
D=42 mm
Pack of 4
Diameter Metri...
Stock No. TRECR/KB/PK5 Made from reinforced plastic and have a steel insert.
Dimensions:
Thread=M8
D=66 mm
H=38 mm
Pack of 4
Diameter Metric: 66
Diameter 2 Me...
Stock No. TRECR/KB/PK6 Made from reinforced plastic and have a steel insert.
Dimensions:
Thread=M8
Thread length=35 mm
H=40mm
D=66mm
Pack of 4
Diameter Metric:...
Stock No. TRECR/KB/PK7 Made from reinforced plastic and have a steel insert.
Dimensions:
Thread=M10
H=62 mm
D=83 mm
Pack of 10
Diameter Metric: 83
Diameter 2 ...
Stock No. TRECR/KB/PK8 Made from reinforced plastic with lift and lock ratchet system, with a steel studding.
Dimensions:
Thread=M6
Thread length=15 mm
H=31 mm
D=43 m...
Stock No. TRECR/KB/PK9 Made from reinforced plastic with lift and lock ratchet system, with a steel tapped insert.
Dimensions:
Thread=M6
H=31 mm
D=43mm
Pack of 4
D...
Stock No. TREINS/P6/10 Threaded inserts for fixings in plastic. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The in...
Stock No. TREINS/P6/50 Threaded inserts for fixings in plastic. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The inse...
Stock No. TREINS/P8/10 Threaded inserts for fixings in plastic. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The in...
Stock No. TREINS/P8/50 Threaded inserts for fixings in plastic. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The in...
Stock No. TREINS/W6/10 Threaded inserts for fixings in woods, man-made boards and fibre board e.g MDF. Threaded inserts have enlarged flange ends to prevent them from 'pull...
Stock No. TREINS/W6/50 Threaded inserts for fixings in woods, man-made boards and fibre board e.g MDF. Threaded inserts have enlarged flange ends to prevent them from 'pull...
Stock No. TREINS/W8/10 Threaded inserts for fixings in woods, man-made boards and fibre board e.g MDF. Threaded inserts have enlarged flange ends to prevent them from 'pull...
Stock No. TREINS/W8/50 Threaded inserts for fixings in woods, man-made boards and fibre board e.g MDF. Threaded inserts have enlarged flange ends to prevent them from 'pulli...
Stock No. TREKB1/M/6 Reinforced plastic. Has steel stud. Ideal for locking sliding plates and bars.
Dimensions:
Thread=M6
Thread length=20 mm
H=15 mm
D=32 mm
...
Stock No. TREKB10/F/10 Reinforced plastic. Has brass insert. Suitable when a strong clamping action is required.
Dimensions:
Thread=M10
Thread Length=25 mm
H=32 mm
...
Stock No. TREKB11/M/6 Reinforced plastic lift and lock ratchet system.
Has steel stud.
Suitable when lever turning angle is limited.
Dimensions:
Thread=M6
Thread L...
Stock No. TREKB12/M/8 Reinforced plastic lift and lock ratchet system.
Has steel stud.
Suitable when lever turning angle is limited.
Dimensions:
Thread=M8
Thread L...
Stock No. TREKB13/M/10 Reinforced plastic lift and lock ratchet system.
Has steel stud.
Suitable when lever turning angle is limited.
Dimensions:
Thread=M10
Thread ...
Stock No. TREKB14/F/6 Reinforced plastic lift and lock ratchet system.
Has steel insert.
Suitable when lever turning angle is limited.
Dimensions:
Thread=M6
H=28 m...
Stock No. TREKB15/F/8 Reinforced plastic lift and lock ratchet system.
Has steel insert.
Suitable when lever turning angle is limited.
Dimensions:
Thread=M8
H=36 m...
Stock No. TREKB16/F/10 Reinforced plastic lift and lock ratchet system.
Has steel insert.
Suitable when lever turning angle is limited.
Dimensions:
Thread=M10
H=45 ...
Stock No. TREKB2/M/8 Reinforced plastic. Has steel stud. Ideal for locking sliding plates and bars.
Dimensions:
Thread=M8
Thread Length=25 mm
H=17 mm
D=40 mm
...
Stock No. TREKB25/M/12 Reinforced plastic lift and lock ratchet system.
Has steel stud.
Suitable when lever turning angle is limited.
Dimensions:
Thread=M12
Thread ...
Stock No. TREKB26/F/12 Reinforced plastic lift and lock ratchet system.
Has steel insert.
Suitable when lever turning angle is limited.
Dimensions:
Thread=M12
H=65 ...
Stock No. TREKB27/M/10X35 Clamping knob with pad for clamping applications.
Dimensions:
Thread=M10
Thread Length=35 mm
H=32 mm
D=32 mm
Pack of 2
Diameter Metric: 3...
Stock No. TREKB3/F/6 Reinforced plastic. Has brass insert. Ideal for locking sliding plates and bars.
Dimensions:
Thread=M6
H=15 mm
D=32 mm
Pack of 4
Diame...
Stock No. TREKB4/F/8 Reinforced plastic. Has brass insert. Ideal for locking sliding plates and bars.
Dimensions:
Thread=M8
H=17 mm
D=40 mm
Pack of 4
Di...
Stock No. TREKB5/M/6 Reinforced plastic. Has steel stud. Suitable when a strong clamping action is required.Dimensions:Thread=M6Thread length=20 mmH=23 mmD=32 mmPack of 2D...
Stock No. TREKB6/M/8 Reinforced plastic. Has steel stud. Suitable when a strong clamping action is required.
Dimensions:
Thread=M8
Thread length=35 mm
H=27 mm
D=...
Stock No. TREKB7/M/10 Reinforced plastic. Has steel stud. Suitable when a strong clamping action is required.
Dimensions:
Thread=M10
Thread length=40 mm
H=32 mm
D...
Stock No. TREKB8/F/6 Reinforced plastic. Has brass insert. Suitable when a strong clamping action is required.Dimensions:Thread=M6D=32 mmH=23 mmPack of 2Diameter Metric: 3...
Stock No. TREKB9/F/8 Reinforced plastic. Has brass insert. Suitable when a strong clamping action is required.Dimensions:Thread=M8H=27 mmD=40 mmPack of 2Diameter Metric: 4...
Stock No. TREMAG/PACK/1 These magnets are nickel plated and incredibly strong making them ideal for a variety of workshop applications with endless possibilities.Dimensions:S...
Stock No. TREMAG/PACK/2 These magnets are nickel plated and incredibly strong making them ideal for a variety of workshop applications with endless possibilities.
Dimensio...
Stock No. TREPTN/10/10 A strong, reliable and easy to fix low cost anchor for wood and fibre board.
Simply insert into a pre-drilled hole and hammer gently into place.
...
Stock No. TREPTN/10/50 A strong, reliable and easy to fix low cost anchor for wood and fibre board.
Simply insert into a pre-drilled hole and hammer gently into place.
...
Stock No. TREPTN/6/10 A strong, reliable and easy to fix low cost anchor for wood and fibre board.
Simply insert into a pre-drilled hole and hammer gently into place.
...
Stock No. TREPTN/6/50 A strong, reliable and easy to fix low cost anchor for wood and fibre board.
Simply insert into a pre-drilled hole and hammer gently into place.
...
Stock No. TREPTN/8/10 A strong, reliable and easy to fix low cost anchor for wood and fibre board.
Simply insert into a pre-drilled hole and hammer gently into place.
...
Stock No. TREPTN/8/50 A strong, reliable and easy to fix low cost anchor for wood and fibre board.
Simply insert into a pre-drilled hole and hammer gently into place.
...
Stock No. TRETM/ACR/3 Square sheet of clear acrylic for use when making routing templates and jigs.
Can be sawn, routed with TCT tools and drilled easily.
Dimensions:...
Stock No. TRETM/ACR/6 Square sheet of clear acrylic for use when making routing templates and jigs.
Can be sawn, routed with TCT tools and drilled easily.
Dimensions:...
Stock No. TRETM/ACR/8 Square sheet of clear acrylic for use when making routing templates and jigs.
Can be sawn, routed with TCT tools and drilled easily.
Dimensions:...
Stock No. TRETM/SLP/65 For making templates, vacuum beds, jigs and fixtures.
Solid laminate can be cut and machined using most TCT blades or cutters.
Dimensions:
Size=6...
Stock No. TRETM/SLP/8 For making templates, vacuum beds, jigs and fixtures.
Solid laminate can be cut and machined using most TCT blades or cutters.
Dimensions:
Size=8...
Stock No. TRETM/SLP/95 For making templates, vacuum beds, jigs and fixtures.
Solid laminate can be cut and machined using most TCT blades or cutters.
Dimensions:
Size=9...
Stock No. TREVBS/15X50 To form a vacuum bed to hold workpieces secure when an obstruction free working area is essential.
Dimensions:
Length=50m
Width=15mm...
Stock No. TREVBS/R8X3 To form a vacuum bed to hold workpieces secure when an obstruction free working area is essential.
Dimensions:
Diameter=8mm
Length=50m...
